2010 Chevrolet Aveo Automatic Transmission Shifter Cable

Start with disconnecting the negative battery cable. Then remove the trim panel from the floor console and place the lever in the park. Loosen the control cable adjusting nut. Move the park/neutral position (PNP) switch lever counterclockwise until the lever stops Pull the shift control cable until it is tight and tighten the control cable adjusting nut. Install the floor console trim panel and connect the negative battery.

Install the shift control cable to the vehicle. Connect the cable to the fastener and install the E-ring to the shift control cable bracket and connect the cable. Connect the shift control cable to the PNP switch and install the shift control cable retaining E-ring. Connect the shift control cable to the shift control lever assembly. Next, install the cable adjusting nut and trim panel to the floor console. Connect the negative battery.

Start with disconnecting the negative battery cable. Next, remove the floor console and the cable adjusting nut. Then disconnect the shift control cable from the shift control lever assembly and remove the shift control cable retaining E-ring. Disconnect the shift control cable from the park/neutral position (PNP) switch and remove the E ring from the bracket and disconnect the cable. Disconnect the shift control cable from the fastener. Then remove the shift control cable from the vehicle.