Part Description: 2010 Chevrolet Camaro Expansion Valve
More Info
Vehicle Fitment
2010 Chevrolet Camaro | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
FAQ for A/C Expansion Valve Repair
Q: How do you remove the A/C refrigerant valve core?
A:
You can recover the refrigerant and use a tool to remove the valve core.
By Bob
GM Specialist
20/10/2021
Q: What is the installation procedure for the A/C refrigerant valve core?
A:
The procedure is to use the valve removal tool to install the valve core, charge the A/C system, and test the A/C for any leaks.
By Bob
GM Specialist
18/10/2021
Q: What should you remove before replacing the A/C refrigerant high-pressure service valve?
A:
You should remove the service port cap and recover the refrigerant.
By Omar
GM Specialist
16/10/2021
FAQ for Other Repair Info
Q: How do you install the blower motor?
A:
You can clean the rough edges, and install the following: the Blower Motor, the motors wire harness connector, and the instrument panel.
Q: How do you install the mode valve actuator gear?
A:
You can install the levers onto the valve, the cam, the gear, and the retainer.
Q: How do I get rid of the odor?
A:
Many vehicles currently incorporate an after-blow function within the HVAC control module software. The after-blow feature, when enabled, employs the HVAC blower fan to dry the evaporator after the vehicle shut down and this function will inhibit microbial growth.