< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Camaro
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Camaro Front Sensor
PartNumber: 13502340
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Front Impact Sensor, Front Sensor, Sensor
- Item Dimensions: 2.8 x 1.6 x 1.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Camaro Front Sensor
Vehicle Fitment- 2010 Chevrolet Camaro | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$210.93 MSRP:$331.73You Save: $120.80 (37%)
OEM (Genuine) 2010 Chevrolet Camaro Side Sensor
PartNumber: 13594496
Product Specifications- Location: Passenger Side; Driver Side
- Other Names: Impact Sensor, Side Impact Sensor, Side Sensor
- Item Dimensions: 2.9 x 1.6 x 1.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 13502341
- Part Description: 2010 Chevrolet Camaro Side Sensor
Vehicle Fitment- 2010 Chevrolet Camaro | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$165.03 MSRP:$248.98You Save: $83.95 (34%)
FAQ for Air Bag Sensor Repair
Q: How many fasteners does the roof side rail inflatable restraint module have?
A:
The roof side rail inflatable restraint module has 8 fasteners in total.
By Bob
GM Specialist
19/10/2021Q: How do you replace the steering wheel inflatable restraint module airbag?
A:
You can release the CPA retainer, disconnect the electrical connectors and deploy the module airbag.
By Bob
GM Specialist
19/10/2021Q: What causes the airbag SIR light to be illuminated?
A:
Some causes may be due to calibration issues with the SDM, or a logic lock-up within the SDM.
By Omar
GM Specialist
19/10/2021Q: What is the front-end inflatable restraint discriminating sensor service procedure?
A:
First, disable the supplemental inflatable restraint (SIR) system, loosen the bolts and slide the sensor out of the keyhole slots.
By Omar
GM Specialist
18/10/2021Q: What is the proper way to replace the airbag?
A:
The proper way is to snap a new airbag into the trim pad, ensure the module is fully deployed, and the SIR system should be enabled.
By Omar
GM Specialist
17/10/2021Q: What should you remove before replacing the driver or passenger seat side inflatable module?
A:
You should disable the SIR system, and remove the front seat, and the cushion cover and pad.
By Bob
GM Specialist
16/10/2021See more FAQs (1)