Part Description: 2010 Chevrolet Camaro Blower Motor
More Info
Vehicle Fitment
2010 Chevrolet Camaro | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
FAQ for Blower Motor Repair
Q: How do you install the blower motor?
A:
You can clean the rough edges, and install the following: the blower motor, the motors wire harness connector, and the instrument panel.
By Omar
GM Specialist
20/10/2021
Q: How many screws does the blower motor cover have?
A:
The blower motor cover has 2 screws in total.
By Bob
GM Specialist
20/10/2021
Q: What is the removal procedure for the blower motor?
A:
The procedure is to remove the I/P compartment, the screws attached to the lower glove box, the blower cover, and the wire harness, and remove the blower motor.
By Bob
GM Specialist
15/10/2021
FAQ for Other Repair Info
Q: How do you install the mode valve actuator gear?
A:
You can install the levers onto the valve, the cam, the gear, and the retainer.
Q: How do you remove the A/C refrigerant valve core?
A:
You can recover the refrigerant and use a tool to remove the valve core.
Q: How do I get rid of the odor?
A:
Many vehicles currently incorporate an after-blow function within the HVAC control module software. The after-blow feature, when enabled, employs the HVAC blower fan to dry the evaporator after the vehicle shut down and this function will inhibit microbial growth.