< Back ×
2010 Chevrolet Camaro Differential
My Vehicle Change Vehicle
2010 Chevrolet Camaro
< Back to View All
Driveline, Axles & 4WD
- Department
- Prices
Product Specifications- Notes: W/O Zl1, Z28, Manual Trans, 3.27 Ratio; Camaro; 3.6l; Manual Trans
- Other Names: Carrier
- Item Dimensions: 21.3 x 15.1 x 13.9 inches
- Item Weight: 83.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20993934, 92246989, 92239177
- Part Description: 2010 Chevrolet Camaro Differential Assembly
Vehicle Fitment- 2010 Chevrolet Camaro | LS, LT, SS | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
- Product Specifications
- Notes: W/O Zl1, Z28, Manual Trans, 3.45 Ratio; Camaro; 6.2l; W/O Supercharger; Manual Trans
- Other Names: Carrier
- Item Dimensions: 20.7 x 15.0 x 14.2 inches
- Item Weight: 79.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20993933, 92239176, 92246988, 92249270
- Part Description: 2010 Chevrolet Camaro Differential Assembly
Vehicle Fitment- 2010 Chevrolet Camaro | LS, LT, SS | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
- Product Specifications
- Notes: W/O Zl1, Z28, Auto Trans, 3.27 Ratio; Camaro; 3.6l; Auto Trans
- Other Names: Carrier
- Item Dimensions: 20.7 x 15.0 x 14.0 inches
- Item Weight: 56.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 92246987, 92239555
- Part Description: 2010 Chevrolet Camaro Differential Assembly
Vehicle Fitment- 2010 Chevrolet Camaro | LS, LT, SS | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
FAQ for Differential Repair
Q: How do you clean the differential case?
A:
You can clean the case, ring gear, and pinion flange with solvent.
By Omar
GM Specialist
20/10/2021Q: What is the amount of differential fluid the vehicle should have?
A:
It should be even with the bottom of the fill plug hole to no lower than 6 mm (0.25 in) below the opening.
By Omar
GM Specialist
19/10/2021Q: What is the recommended bolt torque for the drain plug?
A:
The recommended bolt torque is 33 NM (24 LB-FT).
By Bob
GM Specialist
18/10/2021Q: What is the recommended bolt torque for the differential fill plug?
A:
The recommended bolt torque is 33 Nm (24 lb. ft.).
By Omar
GM Specialist
18/10/2021Q: What is the proper way to install the differential case?
A:
The proper way is to install the following: the bearing caps, electronic locking differential, and the rear differential carrier cover.
By Bob
GM Specialist
17/10/2021Q: What is the recommended bolt torque for the rear differential fill plug?
A:
The recommended bolt torque is 33 Nm (24 LB-FT).
By Omar
GM Specialist
17/10/2021Q: What is the removal procedure for the differential case?
A:
The procedure is to remove the following: the rear differential carrier cover, electronic locking differential, and the different case.
By Omar
GM Specialist
16/10/2021Q: Will the vehicle need to be raised?
A:
Yes, you will need to lift and support the vehicle.
By Bob
GM Specialist
15/10/2021See more FAQs (3)