< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Camaro
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
Dorman® Engine Heater Hose Assembly for 2010 Chevrolet Camaro
PartNumber: 626-592Product Specifications- Notes: Air Bleeder Pipe
- Height: 4.16 in
- Inside Diameter: 0.21 in
- Length: 8. in
- OE Part Number: 12602548
- Outside Diameter: 0.29 in
- Package Contents: 1 Heater Hose Assembly
- UPC: 885484879430
- Width: 0.8 in
- Part Description: 2010 Chevrolet Camaro Engine Heater Hose Assembly
Vehicle Fitment- 2010 Chevrolet Camaro | All Trims | 8 Cyl 6.2L
$33.74
Gates® Safety Stripe Hvac Heater Hose for 2010 Chevrolet Camaro
PartNumber: 28409Product Specifications- Notes: Cut to Length, 24";Cut to Length, 20"
- Centerline Length: 50 ft
- End 1 Inside Diameter: 10 mm
- End 2 Inside Diameter: .375 in
- Material: EPDM
- OE Part Number: 8899
- UPC: 072053081183
- Weight Per Length: 8.25 lbs./Carton
- Working Pressure: 60 PSI
- Part Description: 2010 Chevrolet Camaro Safety Stripe Hvac Heater Hose
Vehicle Fitment- 2010 Chevrolet Camaro | All Trims | 6 Cyl 3.6L
- 2010 Chevrolet Camaro | All Trims | 8 Cyl 6.2L
$45.42
Gates® Safety Stripe Hvac Heater Hose for 2010 Chevrolet Camaro
PartNumber: 28408Product Specifications- Notes: Cut to Length, 26";Cut to Length, 36"
- Centerline Length (in): 600"
- Inside Diameter 1 (in): 0.3125"
- OE Part Number: 49692
- UPC: 072053133226
- Weight Per Length: 7.25 lbs./Carton
- Working Pressure (psi): 60
- Part Description: 2010 Chevrolet Camaro Safety Stripe Hvac Heater Hose
Vehicle Fitment- 2010 Chevrolet Camaro | All Trims | 6 Cyl 3.6L
- 2010 Chevrolet Camaro | All Trims | 8 Cyl 6.2L
$38.12
Gates® Hvac Heater Molded Hose for 2010 Chevrolet Camaro
PartNumber: 19711Product Specifications- Notes: Cut to fit
- Centerline Length (in): 15.3"
- Inside Diameter 1 (in): 0.76"
- Number of Branches: 0
- UPC: 072053447415
- Part Description: 2010 Chevrolet Camaro Hvac Heater Molded Hose
Vehicle Fitment- 2010 Chevrolet Camaro | All Trims | 6 Cyl 3.6L
$14.65
Dayco® Lower Small Id Hvac Heater Hose for 2010 Chevrolet Camaro
PartNumber: 87837Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/8
- End 2 Inside Diameter: 5/8
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 10
- UPC: 036687412775
- Part Description: 2010 Chevrolet Camaro Lower Small Id Hvac Heater Hose
Vehicle Fitment- 2010 Chevrolet Camaro | All Trims | 6 Cyl 3.6L
$5.69
Gates® Hvac Heater Molded Hose for 2010 Chevrolet Camaro
PartNumber: 18341Product Specifications- Centerline Length: 17.3; 439
- End 1 Inside Diameter: .25; 6
- End 2 Inside Diameter: .30; 8
- Material: EPDM
- Molded: Yes
- Number of Quick Connect Fittings: 0
- UPC: 770075528470
- Part Description: 2010 Chevrolet Camaro Hvac Heater Molded Hose
Vehicle Fitment- 2010 Chevrolet Camaro | All Trims | 6 Cyl 3.6L
FAQ for Heater Hose Repair
Q: What is the heater inlet and outlet hose service procedure?
A:
First, drain the coolant and remove the heater inlet rear and outlet hose. Reposition the heater inlet and outlet hose clamps.
By Bob
GM Specialist
18/10/2021Q: What is the heater inlet rear and outlet hose installation procedure?
A:
First, install the heater inlet and outlet hose to the vehicle. Next, connect the heater inlet rear and outlet hose quick connect fittings from the heater inlet and outlet hose fittings. Install the heater inlet rear and outlet hose to the heater core and engage tension on the heater inlet rear and outlet hose clamps. Finally, install the engine cover and fill the cooling system.
By Omar
GM Specialist
18/10/2021Q: What is the heater inlet rear and outlet hose removal procedure?
A:
First, drain the cooling system, remove the engine cover, and disengage tension on the heater inlet rear and outlet hose clamps. Next, remove the heater inlet rear and outlet hose from the heater core. Disconnect the heater inlet rear and outlet hose quick connect fittings from the heater inlet and outlet hose fittings. Finally, remove the heater inlet rear and outlet hose from the vehicle.
By Bob
GM Specialist
18/10/2021Q: What may cause a rattle from the instrument panel?
A:
The raddle coming from the instrument panel may be caused by coolant flow in the heater core.
By Bob
GM Specialist
16/10/2021