< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Camaro
< Back to View All
Transmissions Components & Shifters
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Camaro Solenoid
PartNumber: 22891588
Product Specifications- Other Names: Solenoid
- Item Dimensions: 4.0 x 2.1 x 2.1 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20982000, 22777376
- Part Description: 2010 Chevrolet Camaro Solenoid
Vehicle Fitment- 2010 Chevrolet Camaro | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$21.19 MSRP:$33.33You Save: $12.14 (37%)
FAQ for Shift Interlock Solenoid Repair
Q: How do you install the control solenoid valve and transmission control module?
A:
You can install the following: the new filter plate, manual shift shaft, the upper and lower control valve, and the electrical connector passage sleeve.
By Omar
GM Specialist
20/10/2021Q: How do you install the reverse lockout?
A:
You can install the reverse lockout, connect the lockout electrical connector, and install the exhaust system.
By Bob
GM Specialist
20/10/2021Q: How do you remove the gear select/skip shift solenoid?
A:
You can remove the exhaust system, propeller shaft, and remove solenoid.
By Omar
GM Specialist
20/10/2021Q: What are the procedures to remove the control solenoid valve and transmission control module?
A:
The procedures are to remove the following: the transmission oil pan and filter, the electronic connector passage sleeve, the upper and lower control valve, and remove the filter plate.
By Bob
GM Specialist
19/10/2021Q: How many pins does the M7 transmission shift lock control solenoid actuator have?
A:
The transmission shift lock control solenoid actuator has a total of 3 pins.
By Omar
GM Specialist
19/10/2021Q: What is the proper way to install the gear select/skip shift solenoid?
A:
The proper way is to install the solenoid as well as the electrical connector and install the exhaust system.
By Bob
GM Specialist
17/10/2021Q: What is the proper way to remove the reverse lockout solenoid?
A:
The proper way is to remove the exhaust system, the transmission mount, the bolts as well as the reverse lockout.
By Bob
GM Specialist
17/10/2021See more FAQs (2)