< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Camaro
< Back to View All
Valves, Valve Covers & Valvetrain
- Department
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Camaro Valve Lifters
PartNumber: 17122490
Product Specifications- Notes: Camaro
- Other Names: Valve Lifters
- Item Dimensions: 8.8 x 3.1 x 1.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 5234670, 05234670
- Part Description: 2010 Chevrolet Camaro Valve Lifters
Vehicle Fitment- 2010 Chevrolet Camaro | Base, SS, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS
$35.61 MSRP:$58.94You Save: $23.33 (40%)
OEM (Genuine) 2010 Chevrolet Camaro Filler Cap O-Ring
PartNumber: 12572638
Product Specifications- Notes: Camaro
- Other Names: Filler Cap O-Ring, Valve Lifters
- Item Dimensions: 3.1 x 3.0 x 3.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 12686787
- Part Description: 2010 Chevrolet Camaro Filler Cap O-Ring
Vehicle Fitment- 2010 Chevrolet Camaro | LS, LT | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
$12.98 MSRP:$21.49You Save: $8.51 (40%)
Sealed Power® Valve Lifter for 2010 Chevrolet Camaro
PartNumber: HT-2307Product Specifications- UPC: 614046948730
- Part Description: 2010 Chevrolet Camaro Valve Lifter
Vehicle Fitment- 2010 Chevrolet Camaro | All Trims | 6 Cyl 3.6L
$9.77
Sealed Power® Valve Lifter for 2010 Chevrolet Camaro
PartNumber: HT-2303Product Specifications- Notes: Active Fuel Management Engine;For Int. & Exh. on Cyl. 1-4-6-7; Use Part No. HT2148 for Int. & Exh. on Cyl. 2-3-5-8; For Int. & Exh. on Cyl. 1-4-6-7; Use Part No. HT2148 for Int. & Exh. on Cyl. 2-3-5-8
- UPC: 614046896635
- Part Description: 2010 Chevrolet Camaro Valve Lifter
Vehicle Fitment- 2010 Chevrolet Camaro | All Trims | 8 Cyl 6.2L
$40.88
Sealed Power® Hydraulic Roller Valve Lifter for 2010 Chevrolet Camaro
PartNumber: HT-2148Product Specifications- Notes: Active Fuel Management Engine;Hydraulic Roller Lifters;Non Active Fuel Management Eng;For Int. & Exh. on Cyl. 2-3-5-8; Use Part No. HT2303 for Int. & Exh. on Cyl. 1-4-6-7
- Note: O.E. Replacement
- UPC: 724956564873
- Part Description: 2010 Chevrolet Camaro Hydraulic Roller Valve Lifter
Vehicle Fitment- 2010 Chevrolet Camaro | All Trims | 8 Cyl 6.2L
Sealed Power® Engine Valve Lifter for 2010 Chevrolet Camaro
PartNumber: HT-2148BProduct Specifications- Notes: Active Fuel Management Engine;Bulk Pack;Box of 128;Hydraulic Roller Lifters;Non Active Fuel Management Eng;For Int. & Exh. on Cyl. 2-3-5-8; Use Part No. HT2303 for Int. & Exh. on Cyl. 1-4-6-7
- Note: O.E. Replacement
- Package Alert: Carton of 128
- UPC: 724956696369
- Part Description: 2010 Chevrolet Camaro Engine Valve Lifter
Vehicle Fitment- 2010 Chevrolet Camaro | All Trims | 8 Cyl 6.2L
Sealed Power® Valve Lifter for 2010 Chevrolet Camaro
PartNumber: HT-2303BProduct Specifications- Notes: Active Fuel Management Engine;Box of 50;Bulk Pack;For Int. & Exh. on Cyl. 1-4-6-7; Use Part No. HT2148 for Int. & Exh. on Cyl. 2-3-5-8; For Int. & Exh. on Cyl. 1-4-6-7; Use Part No. HT2148 for Int. & Exh. on Cyl. 2-3-5-8
- UPC: 019826234780
- Part Description: 2010 Chevrolet Camaro Valve Lifter
Vehicle Fitment- 2010 Chevrolet Camaro | All Trims | 8 Cyl 6.2L
FAQ for Valve Lifter Repair
Q: How do you install the valve lifter oil manifold?
A:
You can install the manifold to the engine, connect the electrical connector, and install the intake manifold.
By Omar
GM Specialist
20/10/2021Q: How do you install the valve lifter?
A:
You can start by lubricating the valve lifters, inserting the valve lifters into the guides, and installing the cylinder head as well as the gasket.
By Bob
GM Specialist
20/10/2021Q: How do you remove the valve lifter oil filter?
A:
You can remove the oil filter by removing the intake manifold, oil pressure sensor, and valve lifter oil filter.
By Omar
GM Specialist
19/10/2021Q: What is the proper way to remove the valve lifter oil manifold?
A:
The proper way is to remove the intake manifold, disconnect the engine harness, remove the valve lifter oil manifold, and remove the gasket.
By Omar
GM Specialist
17/10/2021Q: What is the proper way to remove the valve lifter?
A:
The proper way is to remove the following: the cylinder head and gasket, valve lifter guides, and the valve lifters.
By Bob
GM Specialist
17/10/2021