< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Cobalt
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Cobalt Upper Pressure Hose
PartNumber: 25833008
Product Specifications- Notes: 2.2L & 2.4L, 2ND Design; Cobalt; 2.2L, 2.4L
- Item Dimensions: 21.4 x 19.1 x 8.7 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Cobalt Upper Pressure Hose
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
$63.18 MSRP:$150.47You Save: $87.29 (59%)
OEM (Genuine) 2010 Chevrolet Cobalt Lower Pressure Hose
PartNumber: 25806807
Product Specifications- Notes: 2.2L & 2.4L, 2ND Design; Cobalt; 2.2L, 2.4L
- Other Names: Compressor & Condenser Hose, Lower Pressure Hose
- Item Dimensions: 32.6 x 8.6 x 6.8 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Cobalt Lower Pressure Hose
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
OEM (Genuine) 2010 Chevrolet Cobalt Evaporator Hose
PartNumber: 15796693
Product Specifications- Notes: 2.2L & 2.4L
- Other Names: Evaporator Hose, Return Line Assembly
- Item Dimensions: 35.4 x 24.6 x 11.6 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15251744
- Part Description: 2010 Chevrolet Cobalt Evaporator Hose
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
OEM (Genuine) 2010 Chevrolet Cobalt Hose Asm-A/C Compressor & Condenser
PartNumber: 25792063
Product Specifications- Notes: 2.0L; Cobalt; 2.0L
- Other Names: Compressor & Condenser Hose, Lower Pressure Hose
- Item Dimensions: 31.6 x 18.4 x 8.3 inches
- Item Weight: 4.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Cobalt Hose Asm-A/C Compressor & Condenser
Vehicle Fitment- 2010 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS
OEM (Genuine) 2010 Chevrolet Cobalt Hose Asm-A/C Evaporator
PartNumber: 25792074Product Specifications- Notes: 2.0L; Cobalt; 2.0L
- Other Names: Evaporator Hose, Upper Pressure Hose
- Item Dimensions: 36.2 x 13.8 x 5.5 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Cobalt Hose Asm-A/C Evaporator
Vehicle Fitment- 2010 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS
OEM (Genuine) 2010 Chevrolet Cobalt Tube Asm-A/C Condenser
PartNumber: 25792075Product Specifications- Notes: 2.0L
- Other Names: Return Line Assembly
- Item Dimensions: 35.4 x 24.6 x 11.4 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Cobalt Tube Asm-A/C Condenser
Vehicle Fitment- 2010 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS
FAQ for A/C Hose Repair
Q: How do you remove the A/C evaporator hose?
A:
You can remove the charge air cooler inlet pipe, seal washer, and condenser tube.
By Omar
GM Specialist
15/01/2022Q: What is the air conditioning compressor hose installation procedure?
A:
Install the new sealing washers on the compressor and condenser hose fittings. Next, install the A/C compressor and install the new washer to the compressor hose. Install the compressor hose and nut to the evaporator hose. Tighten the nut to 20 Nm.
By Bob
GM Specialist
13/01/2022Q: What is the air conditioning compressor hose removal procedure?
A:
First, remove the charge air cooler outlet pipe and disconnect the electrical connector from the pressure transducer. Next remove the compressor, the sealing washers, and the compressor hose from the condenser.
By Omar
GM Specialist
13/01/2022Q: What is the condenser tube removal procedure?
A:
Remove the condenser tube bolt, the sealing washers, and the air cleaner assembly. Next, remove the condenser tube and the evaporator hose.
By Omar
GM Specialist
13/01/2022Q: What is the proper way to install the A/C evaporator hose?
A:
The proper way is to install the sealing washer, the TXV nut, the compressor hose, and the charge air cooler inlet pipe.
By Omar
GM Specialist
12/01/2022Q: What is the proper way to install the suction screen?
A:
The proper way is to insert the suction screen into the compressor, install the correct mandrel, and tighten the forcing screw.
By Omar
GM Specialist
12/01/2022See more FAQs (1)