< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Cobalt
< Back to View All
ABS & Parking Brake
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Cobalt Modulator
PartNumber: 20827128
Product Specifications- Notes: W/Active Brk Cntl
- Other Names: Control Module, Modulator
- Item Dimensions: 9.2 x 7.4 x 5.3 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25911087
- Part Description: 2010 Chevrolet Cobalt Modulator
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
$266.62 MSRP:$503.06You Save: $236.44 (48%)
OEM (Genuine) 2010 Chevrolet Cobalt Control Module
PartNumber: 25907526
Product Specifications- Notes: W/O Active Brk Cntl
- Other Names: Control Module
- Item Dimensions: 6.2 x 6.2 x 10.2 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Cobalt Control Module
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
$211.65 MSRP:$384.84You Save: $173.19 (46%)
OEM (Genuine) 2010 Chevrolet Cobalt Modulator
PartNumber: 19301490
Product Specifications- Notes: All, W/O Active Brk Cntl
- Item Dimensions: 8.4 x 8.2 x 7.2 inches
- Item Weight: 13.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10386648, 15868931
- Part Description: 2010 Chevrolet Cobalt Modulator
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
OEM (Genuine) 2010 Chevrolet Cobalt Brake Pressure Modulator Valve Kit
PartNumber: 19301489
Product Specifications- Notes: All, W/Active Brake Cntl
- Other Names: Modulator, Modulator Valve
- Item Dimensions: 7.1 x 6.2 x 6.2 inches
- Item Weight: 6.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25911088
- Part Description: 2010 Chevrolet Cobalt Brake Pressure Modulator Valve Kit
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
FAQ for Abs Control Module Repair
Q: How do you remove the BPMV?
A:
You can clean the BPMV fitting area, disconnect the brake pipe fitting, and remove the brake control module.
By Omar
GM Specialist
15/01/2022Q: How do you remove the Electronic brake control module?
A:
You can remove the cover from the ECM, and the TCM, and remove the 12 O-ring seals.
By Omar
GM Specialist
15/01/2022Q: How many bolts does the EBCM to BPMV have?
A:
The EBCM to BPMV has a total of 3 bolts.
By Omar
GM Specialist
14/01/2022Q: How many fittings does the brake pipe have?
A:
The brake pipe has 6 fittings in total.
By Omar
GM Specialist
14/01/2022Q: How many insulators does the BPMV bracket have?
A:
The BPMV bracket has a total of 3 insulators.
By Bob
GM Specialist
14/01/2022Q: How many O-ring seals does the EBCM have?
A:
The EBCM has 8 O-ring seals in total.
By Omar
GM Specialist
13/01/2022Q: How many pins and insulators does the BPMV have?
A:
The BPMV has 2 pins and 3 insulators in total.
By Bob
GM Specialist
13/01/2022Q: What is the installation procedure for the BPMV?
A:
The procedure is to install the EBCM, and the BPMV, connect the master cylinder and connect the EBCM electrical connector.
By Bob
GM Specialist
12/01/2022Q: What is the proper way to install the electronic control module?
A:
The proper way is to install the 12 O-ring seals, and the EBCM, and connect the electronic connector.
By Bob
GM Specialist
12/01/2022Q: What is the proper way to remove the BPMV bracket?
A:
The proper way is to remove the cover from the ECM, release the brake pipes, and remove the BPMV, and the BPMV bracket.
By Bob
GM Specialist
12/01/2022See more FAQs (5)