< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Cobalt
< Back to View All
Alternators, Batteries & Starters
- Department
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Cobalt Negative Cable
PartNumber: 88987148
Product Specifications- Notes: Short
- Other Names: Negative Cable
- Item Dimensions: 12.7 x 3.1 x 2.3 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88987129
- Part Description: 2010 Chevrolet Cobalt Negative Cable
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
$170.58 MSRP:$321.86You Save: $151.28 (48%)
Deka® Positive Battery Cable for 2010 Chevrolet Cobalt
PartNumber: 08865Product Specifications- Color: BLACK
- Gauge: 4
- Length: 7.5 IN
- Nominal OD: 0.354
- Terminal Type: TOP (UNIV)
- UPC: 083996088658
- Part Description: 2010 Chevrolet Cobalt Positive Battery Cable
Vehicle Fitment- 2010 Chevrolet Cobalt | All Trims | 4 Cyl 2.0L
- 2010 Chevrolet Cobalt | All Trims | 4 Cyl 2.2L
OEM (Genuine) 2010 Chevrolet Cobalt Cable Asm, Battery Positive (196.65In. Long)
PartNumber: 88987140
Product Specifications- Notes: Long
- Other Names: Positive Cable
- Item Dimensions: 4.1 x 12.1 x 10.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Cobalt Cable Asm, Battery Positive (196.65In. Long)
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
OEM (Genuine) 2010 Chevrolet Cobalt Cable Asm, Starter Solenoid(38.5 "Long)
PartNumber: 88987143
Product Specifications- Notes: Short
- Other Names: Positive Cable
- Item Dimensions: 6.2 x 2.1 x 12.4 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Cobalt Cable Asm, Starter Solenoid(38.5 "Long)
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
OEM (Genuine) 2010 Chevrolet Cobalt Cable Asm, Battery Negative(22.24 " Long)
PartNumber: 88987144Product Specifications- Notes: Long
- Other Names: Negative Cable
- Item Dimensions: 6.1 x 2.0 x 12.5 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Cobalt Cable Asm, Battery Negative(22.24 " Long)
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
FAQ for Battery Cables Repair
Q: How do I install the negative battery cable?
A:
Start by placing the negative battery cable in the proper location, then attach the cable by screwing the bolt to 17 Nm (13 lb-ft). Then connect the body harness electrical connector to the sensor. Finally, connect the negative battery cable.
By Omar
GM Specialist
18/01/2022Q: How do I remove the negative battery cable?
A:
You will first need to disconnect the negative battery cable from the battery, then disconnect the body harness electrical connector from the sensor. Remove the bolt that attaches to the negative ground wire. Separate the negative battery terminal from the battery support. Now you can remove the negative battery cable.
By Bob
GM Specialist
17/01/2022Q: What is the recommended bolt torque for the cable ground nut?
A:
The recommended bolt torque is 20 Nm (15 LB-FT).
By Bob
GM Specialist
11/01/2022Q: What is the recommended bolt torque for the engine harness ground nut?
A:
The recommended bolt torque is 17 Nm (13 LB-FT).
By Bob
GM Specialist
11/01/2022Q: What is the recommended bolt torque for the injunction block nut?
A:
The recommended bolt torque is 17 Nm (13 LB-FT).
By Bob
GM Specialist
11/01/2022Q: What is the recommended bolt torque for the starter solenoid terminal nut?
A:
The recommended bolt torque is 17 Nm (13 LB-FT).
By Bob
GM Specialist
11/01/2022Q: What should be done before servicing the battery-positive cable?
A:
You will need to disconnect the negative battery cable.
By Bob
GM Specialist
10/01/2022Q: What should I be aware of when replacing the battery negative cable?
A:
When replacing the negative battery cable be sure that the cable is the same type and length.
By Bob
GM Specialist
10/01/2022Q: What will need to be removed to access the negative battery cable?
A:
You will need to relocate the carpet.
By Bob
GM Specialist
07/01/2022Q: When replacing a cable what should be noted?
A:
When replacing a cable always use the same length and purpose type of cable. Never substitute cables.
By Omar
GM Specialist
07/01/2022See more FAQs (7)