< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Cobalt
< Back to View All
Brake Lines & Hoses
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Cobalt Hose Asm-Clutch Actuator Cyl
PartNumber: 12582665
Product Specifications- Notes: Cobalt; 2.2L, 2.4L
- Other Names: Flex Hose
- Item Dimensions: 24.7 x 6.2 x 6.2 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Cobalt Hose Asm-Clutch Actuator Cyl
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
$56.48 MSRP:$98.31You Save: $41.83 (43%)OEM (Genuine) 2010 Chevrolet Cobalt Flex Hose
PartNumber: 24252285
Product Specifications- Notes: Cobalt; 2.0L
- Other Names: Flex Hose
- Item Dimensions: 17.5 x 8.4 x 6.0 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24239951
- Part Description: 2010 Chevrolet Cobalt Flex Hose
Vehicle Fitment- 2010 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS
$30.75 MSRP:$50.91You Save: $20.16 (40%)
OEM (Genuine) 2010 Chevrolet Cobalt Hose Asm, Rear Brake
PartNumber: 19366741
Product Specifications- Notes: Cobalt; W/Rear Disc Brakes; Right
- Other Names: Brake Hose, Flex Hose
- Item Dimensions: 6.9 x 3.1 x 1.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19331547, 22720049
- Part Description: 2010 Chevrolet Cobalt Hose Asm, Rear Brake
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
OEM (Genuine) 2010 Chevrolet Cobalt Hose Asm, Front Brake
PartNumber: 19366692
Product Specifications- Notes: W/O Ss
- Location: Driver Side; Passenger Side
- Other Names: Brake Hose, Flex Hose
- Item Dimensions: 5.3 x 2.0 x 12.7 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22716552, 15870413
- Part Description: 2010 Chevrolet Cobalt Hose Asm, Front Brake
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
OEM (Genuine) 2010 Chevrolet Cobalt Hose Asm, Rear Brake Front
PartNumber: 19366736
Product Specifications- Notes: Drum Brakes; Cobalt; W/O Rear Disc Brakes
- Location: Driver Side; Passenger Side
- Other Names: Brake Hose, Flex Hose
- Item Dimensions: 6.6 x 3.2 x 2.3 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22706789
- Part Description: 2010 Chevrolet Cobalt Hose Asm, Rear Brake Front
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
OEM (Genuine) 2010 Chevrolet Cobalt Hose Asm, Rear Brake
PartNumber: 19366742
Product Specifications- Notes: Cobalt; W/Rear Disc Brakes; Left
- Other Names: Brake Hose, Flex Hose
- Item Dimensions: 7.1 x 3.2 x 1.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22720042, 19331548
- Part Description: 2010 Chevrolet Cobalt Hose Asm, Rear Brake
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
OEM (Genuine) 2010 Chevrolet Cobalt Hose Asm-Front Brake
PartNumber: 15939642
Product Specifications- Notes: W/Ss
- Location: Driver Side; Passenger Side
- Other Names: Brake Hose, Flex Hose
- Item Dimensions: 17.2 x 2.0 x 1.7 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Cobalt Hose Asm-Front Brake
Vehicle Fitment- 2010 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS
OEM (Genuine) 2010 Chevrolet Cobalt Hose Asm-Rear Brake
PartNumber: 25820531
Product Specifications- Notes: Disc Brakes, Ss
- Location: Driver Side; Passenger Side
- Other Names: Brake Hose
- Item Dimensions: 11.3 x 3.5 x 0.9 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Cobalt Hose Asm-Rear Brake
Vehicle Fitment- 2010 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS
FAQ for Brake Line Repair
Q: Can the gaskets be reused?
A:
No, it is recommended the gasket be replaced with a new one every time the part is serviced.
By Omar
GM Specialist
18/01/2022Q: How do I install the brake line hose?
A:
Start by installing the brake hose to the mounting brackets, then attach the clips to the hose fittings at the hose brackets. Attach the brake pipe fittings at the rear brake hose. Install rear and tire assembly. Be sure that the hose isn't touching any part of the suspension. Bleed the hydraulic brake system. Lower vehicle.
By Bob
GM Specialist
18/01/2022Q: How do I install the front brake hose?
A:
Start by connecting the brake hose fitting bolt with the 2 new brake hose gaskets, then install the hose assembly to the caliper, install the bolt attaching the bracket and connect the front brake pipe fitting. Lastly bleed the hydraulic brake system.
By Bob
GM Specialist
18/01/2022Q: How do I install the power brake booster vacuum check valve and hose?
A:
Start by placing the hose clamp to the vacuum hose and install the hose to the vacuum port, then install the power brake booster vacuum sensor to the power vacuum brake booster. Place the hose clamp on the vacuum hose and install the hose to the sensor. Lastly, connect the power brake booster vacuum sensor.
By Bob
GM Specialist
18/01/2022Q: How do I remove the brake line hose?
A:
After removing the tire assembly, clean all the dirt and debris from the brake hose ends and pipe fittings. With a backup wrench disconnect the brake pipe fittings from the brake hose end, and remove the retaining clips attaching the housing to the mounting bracket. Now remove the rear brake hose.
By Omar
GM Specialist
17/01/2022Q: How do I remove the front brake hose?
A:
After removing the wheel and tire assembly, you will need to disconnect the front brake pipe fitting, then cap the pipe fitting, remove the bolt attaching the hose bracket, the hose fitting bolt, and fitting gaskets. Now you can remove the front brake hose.
By Omar
GM Specialist
17/01/2022Q: How do I remove the power brake booster vacuum check valve and hose?
A:
Start with applying and releasing the brake pedal several times until the pedal becomes firm to deplete the vacuum reserve, disconnect the power brake booster vacuum sensor electrical connector, remove the sensor and release the hose clamp. Remove the vacuum hose from the sensor. Then release the hose clamp and disconnect the vacuum hose from the intake manifold vacuum port.
By Bob
GM Specialist
17/01/2022Q: What is the recommended bolt torque for the brake hose assembly to the caliper bolt?
A:
The recommended bolt torque is 48 Nm (35 LB-FT).
By Omar
GM Specialist
11/01/2022Q: What is the recommended bolt torque for the brake pipe fitting?
A:
The recommended bolt is 21 Nm (15 LB-FT).
By Omar
GM Specialist
11/01/2022Q: What is the recommended pipe type if replacing the brake pipe flaring kit?
A:
Always use double-walled steel brake pipe when replacing brake pipes.
By Bob
GM Specialist
11/01/2022See more FAQs (13)