< Back ×
2010 Chevrolet Cobalt Crossmember Bushing
My Vehicle Change Vehicle
2010 Chevrolet Cobalt
< Back to View All
Suspension System Components
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Cobalt Axle Beam Insulator
PartNumber: 20902798$51.15 MSRP:$84.10You Save: $32.95 (40%)Product Specifications- Notes: W/O 4 Wheel Disc
- Other Names: Axle Beam Insulator, Insulator
- Item Dimensions: 4.4 x 4.2 x 4.2 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22716524, 22696480
- Part Description: 2010 Chevrolet Cobalt Axle Beam Insulator
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
- Product Specifications
- Notes: W/4 Wheel Disc, Ss
- Other Names: Axle Beam Insulator, Insulator
- Item Dimensions: 3.6 x 3.6 x 3.6 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Cobalt Insulator-Rear Suspension
Vehicle Fitment- 2010 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS
FAQ for Crossmember Bushing Repair
Q: How do you install crossbar number 5?
A:
You can plug the weld, clean the welded area, apply sealers, and connect the battery cable.
By Bob
GM Specialist
16/01/2022Q: How do you install the floor panel number 4 crossbar extension?
A:
You can install all the panels, and components, connect the battery cable and enable the SIR system.
By Omar
GM Specialist
16/01/2022Q: How do you install the floor panel number 4 crossbar?
A:
You can install the panels and components, apply sealers, paint the repaired area, and enable the SIR system.
By Bob
GM Specialist
15/01/2022Q: How do you remove the crossbar extension?
A:
You can disable the SIR system, and remove the sealers, anti-corrosions, and bar extension.
By Omar
GM Specialist
15/01/2022Q: How do you remove the floor panel number 1 crossbar?
A:
You can remove the panels, components, sealers, and cross bars.
By Bob
GM Specialist
15/01/2022Q: What is the installation procedure for the crossbar extension?
A:
The procedure is to apply sealers, anti-corrosion, and enable the SIR system.
By Omar
GM Specialist
12/01/2022Q: What is the installation procedure for floor panel number 1 crossbar?
A:
The procedure is to install the panels and components, connect the battery cable, and enable the SIR system.
By Omar
GM Specialist
12/01/2022Q: What is the proper way to remove the floor panel number 4 crossbar?
A:
The proper way is to disable the SIR system and remove all the panels, components, anti-corrosion materials, and the crossbar.
By Omar
GM Specialist
12/01/2022Q: What is the removal procedure for crossbar number 5?
A:
The procedure is to disable the SIR system, and remove the sealers, and the crossbar.
By Omar
GM Specialist
11/01/2022Q: What is the removal procedure for floor panel number 4 crossbar extension?
A:
The procedure is to disable the SIR system and disconnect the battery cable, the sealers, and the crossbar.
By Bob
GM Specialist
11/01/2022See more FAQs (5)