< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Cobalt
< Back to View All
Timing Belts, Chains, Cams & Related Parts
- Department
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Cobalt Crankshaft Balance
PartNumber: 90537704
Product Specifications- Notes: 2.2 Liter; 2.0 Liter Turbocharged; Cobalt; 2.0L;Cobalt; 2.2L
- Item Dimensions: 8.2 x 8.1 x 4.2 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12623793, 12787628
- Part Description: 2010 Chevrolet Cobalt Crankshaft Balance
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
$131.85 MSRP:$218.25You Save: $86.40 (40%)
Dorman® OE Solutions Regular Grade Type Harmonic Balancer Assembly Kit for 2010 Chevrolet Cobalt
PartNumber: 594-309Product Specifications- Color/Finish: Black
- Degree Markings: Yes
- Depth: 60 mm
- Drive Belt Type: Serpentine
- Grade Type: Regular
- Inside Diameter: 28.03 mm
- OE Part Number: 12623793, 12787628, 55355289, 90537704
- Outside Diameter: 166 mm
- Pulley Groove Quantity: 6
- UPC: 019495250999
- Part Description: 2010 Chevrolet Cobalt OE Solutions Regular Grade Type Harmonic Balancer Assembly Kit
Vehicle Fitment- 2010 Chevrolet Cobalt | All Trims | 4 Cyl 2.2L
- 2010 Chevrolet Cobalt | All Trims | 4 Cyl 2.0L
$57.10
Dayco® PREMIUM OEM REPL BALANCER, POWERBOND for 2010 Chevrolet Cobalt
PartNumber: PB1515NProduct Specifications- Bolt Hole Quantity: 3
- Counterweight Balance: Neutral, no counterweight
- Crank Bore: 1.103; 28.01
- Crank Trigger/Exciter Plate: No
- Hardware Included: No
- Installation Instructions Included: No
- Nose Outside Diameter: 1.532; 38.90
- Number of Integrated Pulleys: 1
- Outer Ring Material: Cast Iron
- Overall Outside Diameter: 163.00; 6.418
- Overall Width: 2.235; 56.75
- Pulley 1 Number Of Grooves: 5
- Pulley 1 Outside Diameter: 160.000; 6.300
- Pulley 1 Type: Serpentine
- Ring Width: 1.247; 31.65
- Timing Marks: Yes
- Woodruff Key Included: No
- Part Description: 2010 Chevrolet Cobalt PREMIUM OEM REPL BALANCER, POWERBOND
Vehicle Fitment- 2010 Chevrolet Cobalt | All Trims | 4 Cyl 2.2L
- 2010 Chevrolet Cobalt | All Trims | 4 Cyl 2.0L
$67.71
FAQ for Harmonic Balancer Repair
Q: How do I install the crankshaft balancer?
A:
Install the new balancer then attach the new crankshaft balancer bolt, use the balancer holder to prevent the crankshaft from rotating while tightening the crankshaft balancer bolt. Install the drive belt and then install the right engine splash shield.
By Bob
GM Specialist
18/01/2022Q: How do I remove the crankshaft balancer?
A:
Start by removing the right engine splash shield, then remove the engine drive belt, use the balancer to prevent the crankshaft from rotating while loosening the crankshaft balancer bolt, then remove the crankshaft balancer.
By Omar
GM Specialist
17/01/2022