< Back ×
2010 Chevrolet Cobalt Wheel Bearing
My Vehicle Change Vehicle
2010 Chevrolet Cobalt
< Back to View All
Wheel Hubs, Bearings & Seals
- Department
- Location
- Brands
- Prices
FAG® Front Passenger Side Wheel Bearing and Hub Assembly for 2010 Chevrolet Cobalt
PartNumber: 102212$84.03Product Specifications- Notes: FAG Global# 102212
- Hub Flange Mount Hole Quantity: 3
- Number of Bolt Holes: 3
- Number of Hub Bolts: 4
- UPC: 670774136368
- Part Description: 2010 Chevrolet Cobalt Front Passenger Side Wheel Bearing and Hub Assembly
Vehicle Fitment- 2010 Chevrolet Cobalt | All Trims | All Engines
National® Front Driver Side Outer Tapered Wheel Bearing and Race Set for 2010 Chevrolet Cobalt
PartNumber: A-35$14.30Product Specifications- Notes: Taper Bearing Set Incls Cup & Cone; w/Getrag 287 Trans
- Part Description: 2010 Chevrolet Cobalt Front Driver Side Outer Tapered Wheel Bearing and Race Set
Vehicle Fitment- 2010 Chevrolet Cobalt | All Trims | All Engines
$91.05Product Specifications- Notes: 4 Stud Hub Assy; FAG Global# 102039; ABS Cable Included
- Hub Flange Mount Hole Quantity: 3
- Number of Bolt Holes: 3
- Number of Hub Bolts: 4
- UPC: 670774136351
- Part Description: 2010 Chevrolet Cobalt Front Driver Side Wheel Bearing and Hub Assembly
Vehicle Fitment- 2010 Chevrolet Cobalt | LS | All Engines
- 2010 Chevrolet Cobalt | LT | All Engines
$128.62 MSRP:$242.70You Save: $114.08 (48%)Product Specifications- Notes: Cobalt; W/O Ss Model; W/Rear Disc Brakes; Drum Brakes, W/ABS, W/Alloy Wheel
- Location: Driver Side; Passenger Side
- Item Dimensions: 7.3 x 7.1 x 8.6 inches
- Item Weight: 7.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22715555
- Replaced by: 19259816
- Part Description: 2010 Chevrolet Cobalt Hub & Bearing
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
Product Specifications- Notes: Cobalt; W/O Ss Model; W/O Rear Disc Brakes; W/O ABS
- Other Names: Hub & Bearing Assembly, Hub Assembly
- Item Dimensions: 7.3 x 6.8 x 8.6 inches
- Item Weight: 7.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22671548
- Part Description: 2010 Chevrolet Cobalt Hub & Bearing Assembly
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
Product Specifications- Notes: Disc Brakes, Ss; Cobalt; W/Ss Model
- Location: Driver Side; Passenger Side
- Item Dimensions: 7.4 x 6.8 x 8.9 inches
- Item Weight: 8.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10399802, 22721886
- Part Description: 2010 Chevrolet Cobalt Rear Wheel Bearing (W/ Wheel Speed Sensor)
Vehicle Fitment- 2010 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS
Product Specifications- Notes: Cobalt; W/O Ss Model; W/O Rear Disc Brakes; W/ABS; Drum Brakes, W/ABS, W/O Alloy Wheel
- Location: Driver Side; Passenger Side
- Other Names: Hub & Bearing Assembly, Hub Assembly
- Item Dimensions: 7.1 x 6.9 x 8.8 inches
- Item Weight: 7.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22671547
- Part Description: 2010 Chevrolet Cobalt Rear Wheel Bearing
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
FAQ for Wheel Bearing Repair
Q: How do you install the rear wheel bearing and hub?
A:
You can install the wheel bearing/hub, connect the electrical connector, and the brake rotor.
By Omar
GM Specialist
15/01/2022Q: How do you remove the rear wheel bearing and hub?
A:
You can remove the brake drum, the plug, wheel bearing.
By Bob
GM Specialist
14/01/2022Q: How many bolts attach to the wheel bearing/hub?
A:
3 Bolts attach the part.
By Bob
GM Specialist
14/01/2022Q: What is the installation procedure for the rear wheel bearing and hub?
A:
The procedure is to install the wheel bearing/hub, remove the support, and install the brake drum.
By Bob
GM Specialist
12/01/2022Q: What is the recommended bolt torque for the wheel bearing/hub bolt?
A:
The recommended bolt torque is 115 Nm (85 LB-FT).
By Omar
GM Specialist
11/01/2022Q: What is the removal procedure for the rear wheel bearing and hub?
A:
The procedure is to remove the rear brake caliper, the brake rotor, and the wheel bearing/hub.
By Omar
GM Specialist
11/01/2022Q: What should be done before servicing the Front Wheel Bearing and Hub?
A:
You will need to lift and support the vehicle. Remove the wheel and tire assembly, the front brake rotor, and the wheel drive shaft assembly from the knuckle.
By Bob
GM Specialist
10/01/2022See more FAQs (2)