Part Description: 2010 Chevrolet Colorado Fan & Motor
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Blower Motor Repair
Q: What is the blower motor installation procedure?
A:
Install the blower motor and connect the blower motor electrical connector. Install the blower motor cooling tube and install the blower motor mounting screws. Tighten the screws to 2 Nm and install the right hinge pillar trim panel.
By Bob
GM Specialist
15/03/2022
FAQ for Other Repair Info
Q: What is the blower motor resistor assembly installation procedure?
A:
First, install the Blower Motor Resistor next install the blower motor resistor mounting screws. Tighten the screws to 1.9 Nm and connect the blower motor resistor electrical connector.
Q: How do you install the Heater Inlet Rear Hose?
A:
You need to install the heater inlet rear hose, reposition the heater inlet rear hose clamp, connect the heater inlet rear hose quick connect fitting, and fill the cooling system.
Q: What is the installation Procedure for the Air Inlet Valve Actuator?
A:
The procedure is to install the recirculation actuator, and the screws, connect the electrical connector to the recirculation actuator and finally install the HVAC module assembly.