< Back ×
2010 Chevrolet Colorado Differential Pinion Bearing
My Vehicle Change Vehicle
2010 Chevrolet Colorado
< Back to View All
Driveline, Axles & 4WD
- Department
- Location
- Brands
- Prices
$17.07Product Specifications- Notes: with AAM Axle; with 8in Ring Gear
- UPC: 724956020683
- Part Description: 2010 Chevrolet Colorado Front Outer Differential Pinion Bearing
Vehicle Fitment- 2010 Chevrolet Colorado | All Trims | All Engines
$25.51Product Specifications- Notes: w/AAM Axle; w/Independent Carrier Assy; w/7.6in Ring Gear
- Part Description: 2010 Chevrolet Colorado Rear Inner Differential Pinion Bearing
Vehicle Fitment- 2010 Chevrolet Colorado | All Trims | All Engines
$48.53 MSRP:$96.32You Save: $47.79 (50%)Product Specifications- Notes: Canyon, Colorado
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.4 x 3.4 x 1.2 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 9442126, 09442126
- Part Description: 2010 Chevrolet Colorado Rear Wheel Bearing
Vehicle Fitment- 2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, Trail Boss, WT, Z71, Z71 LS, Z85, Z85 LS, ZR2 | 4 Cyl 2.7 L GAS, 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$37.48 MSRP:$68.16You Save: $30.68 (46%)Product Specifications- Notes: Canyon, Colorado
- Item Dimensions: 3.0 x 3.0 x 1.1 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Colorado Outer Pinion Bearing
Vehicle Fitment- 2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$68.05 MSRP:$128.42You Save: $60.37 (48%)Product Specifications- Notes: Canyon, Colorado
- Item Dimensions: 3.6 x 3.6 x 1.6 inches
- Item Weight: 1.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Colorado Front Pinion Bearing
Vehicle Fitment- 2010 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
- $74.26 MSRP:
$140.14You Save: $65.88 (48%)Product Specifications- Notes: Canyon, Colorado
- Other Names: Side Bearings
- Item Dimensions: 4.3 x 4.1 x 2.1 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 09418390, 9418390
- Part Description: 2010 Chevrolet Colorado Side Bearings
Vehicle Fitment- 2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
- $73.89 MSRP:
$139.44You Save: $65.55 (48%)Product Specifications- Notes: Canyon, Colorado
- Item Dimensions: 4.1 x 4.2 x 2.1 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26053758, 9418357, 15286375, 20997052, 22786621, 9418356, 09418356, 12479221, 09418357
- Part Description: 2010 Chevrolet Colorado Outer Pinion Bearing
Vehicle Fitment- 2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Differential Pinion Bearing Repair
Q: What can you do to work the cups out of the housing evenly?
A:
Position the brass drift in the slots provided in the axle housing. Move the drift back and forth between one side of the cup and the other.
By Bob
GM Specialist
20/03/2022Q: What is the recommended torque for the rotating torque of the pinion for used bearings? And the new bearings?
A:
The recommended torque for used bearings is 1.0-2.8 Nm (10-25 lb in), and 1.7-3.4 Nm (15-30 lb in) for new bearings.
By Bob
GM Specialist
18/03/2022Q: What kind of special tools are required for the Differential Drive Pinion Gear Bearing (8.6 Inch Axle)?
A:
DT 49032-Pinion Bearing Cup Installer, DT 49275-Pinion Bearing Remover, J 8092-Universal Driver Handle 3/4 in-10, J 22828-Input Shaft Gear Installer, J 22912-B-Bearing Remover, and J 28677-Needle Bearing Installer.
By Omar
GM Specialist
17/03/2022Q: What kind of special tools are required when removing the Differential Drive Pinion Gear Bearing?
A:
J7817 Outer Bearing Race Installer, J 8092 Universal Driver Handle-3/4 in - 10, J 8608 Rear Pinion Bearing Race Installer, J 8614-01 Flange and Pulley Holding Tool, J 22912-B Split-Plate Bearing Puller, J 24433 Pinion Cone and Side Bearing Installer, J 33782 Pinion Oil Seal Installer.
By Bob
GM Specialist
17/03/2022Q: What should you do when the rotating torque is exceeded?
A:
The pinion will have to be removed and a new collapsible spacer installed.
By Bob
GM Specialist
17/03/2022