< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Colorado
< Back to View All
Timing Belts, Chains, Cams & Related Parts
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Colorado AC Belt
PartNumber: 12626222
Product Specifications- Notes: 5.3 Liter; Canyon, Colorado; W/Ac; 5.3L
- Other Names: Drive Belt, Serpentine Belt
- Item Dimensions: 6.2 x 3.4 x 0.9 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12590622
- Part Description: 2010 Chevrolet Colorado AC Belt
Vehicle Fitment- 2010 Chevrolet Colorado | LT | 8 Cyl 5.3 L GAS
$36.63 MSRP:$66.32You Save: $29.69 (45%)
OEM (Genuine) 2010 Chevrolet Colorado AC Belt
PartNumber: 19210691
Product Specifications- Notes: 5.3 Liter; Canyon, Colorado; 5.3L
- Other Names: AC Belt
- Item Dimensions: 16.8 x 9.8 x 3.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19178068, 12603509
- Part Description: 2010 Chevrolet Colorado AC Belt
Vehicle Fitment- 2010 Chevrolet Colorado | LT | 8 Cyl 5.3 L GAS
$46.02 MSRP:$81.30You Save: $35.28 (44%)
OEM (Genuine) 2010 Chevrolet Colorado Serpentine Belt
PartNumber: 12611636
Product Specifications- Notes: W/Ac, 2.9 & 3.7 Liter; Canyon, Colorado; W/Ac; 2.9L, 3.7L
- Other Names: Serpentine Belt
- Item Dimensions: 18.2 x 4.2 x 0.9 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12580826, 12593776
- Part Description: 2010 Chevrolet Colorado Serpentine Belt
Vehicle Fitment- 2010 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS
$38.91 MSRP:$70.43You Save: $31.52 (45%)
FAQ for Drive Belt Repair
Q: What can cause the drive belt to vibrate?
A:
The vibration can be caused by the A/C system, incorrect fluid, and an extra load.
By Bob
GM Specialist
16/03/2022Q: What causes the drive belt to chirp, squeal, and whine?
A:
The chirping or squealing noise may be caused by moisture, it may vary on the load capacity and improper installation.
By Omar
GM Specialist
15/03/2022Q: What causes the drive belt to fall off or wear out?
A:
The drive belt falling off or wearing out may be due to extra load, incorrect length, and minor misalignment.
By Bob
GM Specialist
15/03/2022Q: What is the drive belt installation procedure?
A:
Install the 3/8 inch breaker bar on the drive belt tensioner and rotate the tensioner clockwise. Next route the drive belt over the top of the water pump pulley. Slowly release the tension to the drive belt tensioner and inspect for proper installation of the drive belt on the pulleys.
By Omar
GM Specialist
15/03/2022Q: What is the drive belt tensioner installation procedure?
A:
First, install the drive belt, and the drive belt tensioner bolt and tighten to 50 Nm. Install the drive belt replacement.
By Bob
GM Specialist
15/03/2022