< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Corvette
< Back to View All
Engine Sensors, Switches & Relays
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Corvette PEDAL ASM, ACCEL (W/ BRKT & POSN SEN)
PartNumber: 19417903
Product Specifications- Notes: Corvette
- Other Names: Pedal Travel Sensor
- Item Dimensions: 9.5 x 7.2 x 16.8 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15864594, 25835421, 12569599
- Part Description: 2010 Chevrolet Corvette PEDAL ASM, ACCEL (W/ BRKT & POSN SEN)
Vehicle Fitment- 2010 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
FAQ for Accelerator Pedal Position Sensor Repair
Q: What is the proper way to install the accelerator pedal position sensor?
A:
The proper way is to install the accelerator pedal, and the mounting bolts, connect the accelerator pedal and install the insulator panel.
By Bob
GM Specialist
05/04/2022Q: How do I install Vehicle Yaw Sensor with Vehicle Lateral Accelerometer?
A:
Start with placing the sensor in the vehicle, then tighten the bolts to 7 Nm (62 LB IN). Connect the sensor electrical connector. Next, install the HVAC control Module and the IP accessory Trim plate. Then turn the ignition on with the engine off. Vehicle Yaw Sensor with Vehicle Lateral Accelerometer.
By Omar
GM Specialist
05/01/2022Q: How do I remove the Vehicle Yaw Sensor with Vehicle Lateral Accelerometer?
A:
Start with turning the ignition off. Then remove the I/P accessory trim plate and the HVAC control module. Disconnect the sensor electrical connector. Remove the sensor by removing the nuts attaching it to the vehicle.
By Bob
GM Specialist
04/01/2022Q: How do you remove the accelerator pedal position sensor?
A:
You can remove the I/P closeout insulator panel, disconnect the electrical connector, and remove the accelerator panel.
By Bob
GM Specialist
03/01/2022