< Back ×
2010 Chevrolet Corvette Coolant Reservoir
My Vehicle Change Vehicle
2010 Chevrolet Corvette
< Back to View All
Cooling Systems, Fans & Radiators
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Corvette Reservoir
PartNumber: 20844022$233.01 MSRP:$369.96You Save: $136.95 (38%)Product Specifications- Notes: W/Supercharged
- Other Names: Reservoir
- Item Dimensions: 15.3 x 11.9 x 11.5 inches
- Item Weight: 2.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25948317
- Part Description: 2010 Chevrolet Corvette Reservoir
Vehicle Fitment- 2010 Chevrolet Corvette | ZR1 | 8 Cyl 6.2 L GAS
Product Specifications- Notes: Corvette; W/O Supercharged; W/Supercharged
- Other Names: Reservoir, Reservoir Tank
- Item Dimensions: 8.2 x 8.2 x 17.3 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25922058, 10304487
- Part Description: 2010 Chevrolet Corvette Reservoir
Vehicle Fitment- 2010 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
FAQ for Coolant Reservoir Repair
Q: What is the proper way to remove the surge tank outlet hose/pipe?
A:
Start by draining the coolant and removing the radiator support. Next, disengage the outlet hose clamp and disconnect the outlet hoses from the water pump. Finally, remove the surge tank outlet hose assembly from the vehicle.
By Omar
GM Specialist
04/04/2022Q: What is the torque spec on the radiator surge tank side nut?
A:
The side nut should be torqued to 8 Nm (71 in./lbs.).
By Omar
GM Specialist
01/04/2022Q: What is the torque spec on the radiator surge tank upper nut?
A:
The upper nut should be torqued to 8 Nm (71 in./lbs.).
By Bob
GM Specialist
01/04/2022Q: What is used to hold the outlet hose in place?
A:
Ahose clamp is used to hold the outlet hose in place.
By Bob
GM Specialist
01/04/2022Q: Are any special tools necessary to replace the inlet hose/pipe?
A:
You will need some hose clamp pliers (J38185).
By Omar
GM Specialist
07/01/2022