2010 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
FAQ for A/C Receiver Drier Repair
Q: What is the recommended torque when you tighten the receiver and dehydrator bolt?
A:
You can tighten the bolt to 6.5 Nm (58 lb in).
By Bob
GM Specialist
28/10/2022
Q: What should you do before replacing the Receiver and Dehydrator?
A:
You should recover the refrigerant, remove the radiator air lower baffle and deflector and remove the radiator air upper baffle and deflector.
By Bob
GM Specialist
28/10/2022
Q: What is the recommended torque when you tighten the receiver and dehydrator bracket bolt?
A:
You can tighten the bolt to 4.2 Nm (37 lb in).
By Bob
GM Specialist
28/10/2022
FAQ for Other Repair Info
Q: What should you do before replacing the Blower Motor?
A:
You should remove the right side instrument panel (I/P) insulator panel and disconnect the Blower Motor electrical connector.
Q: How many fasteners does the heater core cap have?
Q: What should you remove before replacing the Air Conditioning Condenser?
A:
You should remove the radiator air lower baffle and deflector, the radiator air upper baffle and deflector, the air conditioning compressor hose, the air conditioning condenser, and the air conditioning evaporator tube.