< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Equinox
< Back to View All
Power Steering Lines & Hoses
- Department
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Equinox Cooler Pipe
PartNumber: 20912244
Product Specifications- Notes: 3.0 & 3.6 Liter; Equinox, Terrain
- Other Names: Cooler Pipe, Power Steering Pressure Hose
- Item Dimensions: 48.5 x 10.3 x 7.4 inches
- Item Weight: 5.20 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19435254
- Part Description: 2010 Chevrolet Equinox Cooler Pipe
Vehicle Fitment- 2010 Chevrolet Equinox | LS, LT, LTZ | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
$133.26 MSRP:$220.58You Save: $87.32 (40%)
OEM (Genuine) 2010 Chevrolet Equinox Power Steering Return Hose
PartNumber: 20889074
Product Specifications- Notes: 3.0 & 3.6 Liter; Equinox, Terrain
- Other Names: Power Steering Return Hose, Pressure Hose
- Item Dimensions: 30.0 x 8.4 x 3.8 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20823063
- Part Description: 2010 Chevrolet Equinox Power Steering Return Hose
Vehicle Fitment- 2010 Chevrolet Equinox | LS, LT, LTZ | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
$56.38 MSRP:$93.33You Save: $36.95 (40%)
Gates® Bulk Power Steering Bulk Hose Pipe To Reservoir for 2010 Chevrolet Equinox
PartNumber: 362190Product Specifications- Notes: Cut to fit
- Inside Diameter: 0.375"
- Length: 48"
- Material: CPE (Chlorinated Polyethylene)
- UPC: 072053427028
- Part Description: 2010 Chevrolet Equinox Bulk Power Steering Bulk Hose Pipe To Reservoir
Vehicle Fitment- 2010 Chevrolet Equinox | All Trims | 6 Cyl 3.0L
$19.22
OEM (Genuine) 2010 Chevrolet Equinox Pipe Kit
PartNumber: 25904106
Product Specifications- Notes: 3.0 & 3.6 Liter
- Location: Passenger Side
- Other Names: Pipe Kit
- Item Dimensions: 16.2 x 2.9 x 2.2 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Equinox Pipe Kit
Vehicle Fitment- 2010 Chevrolet Equinox | LT, LTZ, Premier | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$34.81 MSRP:$55.52You Save: $20.71 (38%)
Gates® Power Steering Pressure Line Hose Assembly for 2010 Chevrolet Equinox
PartNumber: 352397Product Specifications- End 1 Diameter: 16 mm
- End 1 Type: Male O-Ring
- End 2 Diameter: 18 mm
- End 2 Diameter (mm): 18 mm
- End 2 Type: Male O-Ring
- Length: 41"
- Switch Port: Without Switch Port
- UPC: 770075667094
- Part Description: 2010 Chevrolet Equinox Power Steering Pressure Line Hose Assembly
Vehicle Fitment- 2010 Chevrolet Equinox | All Trims | 6 Cyl 3.0L
Gates® Bulk High Temperature Power Steering Bulk Hose for 2010 Chevrolet Equinox
PartNumber: 349950Product Specifications- Notes: Cut to fit
- Burst Pressure: 1800 psi
- Inside Diameter: 0.375"
- Length: 300"
- Material: CPE (Chlorinated Polyethylene)
- Temperature Range: -40°F to +300°F (-40°C to +150°C)
- UPC: 072053418811
- Working Pressure: 250 psi
- Part Description: 2010 Chevrolet Equinox Bulk High Temperature Power Steering Bulk Hose
Vehicle Fitment- 2010 Chevrolet Equinox | All Trims | 6 Cyl 3.0L
OEM (Genuine) 2010 Chevrolet Equinox Pipe Kit
PartNumber: 19210056
Product Specifications- Notes: 3.0 & 3.6 Liter
- Location: Driver Side
- Other Names: Pipe Kit
- Item Dimensions: 9.4 x 5.2 x 2.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Equinox Pipe Kit
Vehicle Fitment- 2010 Chevrolet Equinox | LT, LTZ, Premier | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
OEM (Genuine) 2010 Chevrolet Equinox Hose, P/S Fluid Reservoir
PartNumber: 22766966
Product Specifications- Notes: 3.0 & 3.6 Liter
- Other Names: Reservoir Hose
- Item Dimensions: 14.2 x 10.4 x 2.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20889072, 25950532
- Part Description: 2010 Chevrolet Equinox Hose, P/S Fluid Reservoir
Vehicle Fitment- 2010 Chevrolet Equinox | LT, LTZ | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
FAQ for Power Steering Hose Repair
Q: How many O-ring seals does the power steering gear inlet hose have?
A:
The power steering gear inlet hose has a total of 2 O-ring seals.
By Bob
GM Specialist
02/11/2022Q: How do you install the Power Steering Fluid Cooling Pipe?
A:
You can position the power steering fluid cooling pipe in the vehicle, connect the 3 power steering fluid cooling pipe clips, install the 2 power steering fluid cooling pipe bolts, connect the power steering fluid cooling pipe bracket to the stud, install the power steering fluid cooling pipe nut, connect the power steering fluid cooling pipe clip, install the power steering fluid cooling pipe bolt, connect the power steering fluid cooling pipe to the reservoir and the power steering gear, fill and bleed the power steering system, clean any excess power steering fluid from the vehicle, remove the drain pans, install the front bumper fascia and then install the intake manifold cover.
By Bob
GM Specialist
02/11/2022Q: What should you remove before replacing the Power Steering Fluid Reservoir Outlet Hose?
A:
You should remove the intake manifold cover, remove as much power steering fluid from the upper power steering fluid reservoir as possible, remove the air cleaner outlet duct, remove the air cleaner assembly and remove the right front tire and wheel assembly.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque when you tighten the power steering gear inlet hose?
A:
You can tighten the hose to 34 Nm (25 lb-ft).
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the Power Steering Fluid Cooling Pipe?
A:
The procedure is to place drain pans under the vehicle, remove the intake manifold cover, remove as much power steering fluid from the upper power steering fluid reservoir as possible, remove the front bumper fascia, disconnect the power steering fluid cooling pipe from the power steering gear and the lower power steering fluid reservoir, remove the power steering fluid cooling pipe bolt, disconnect the power steering fluid cooling pipe clip, remove the power steering fluid cooling pipe nut, disconnect the bracket from the stud, remove the 2 power steering fluid cooling pipe bolts, disconnect the 3 power steering fluid cooling pipe clips and remove the power steering fluid cooling pipe from the vehicle.
By Bob
GM Specialist
02/11/2022Q: What should you do before replacing the Power Steering Gear Inlet Pipe/Hose?
A:
You should place drain pans under the vehicle, remove the intake manifold cover, remove as much power steering fluid from the upper power steering fluid reservoir as possible and raise and support the vehicle.
By Bob
GM Specialist
02/11/2022See more FAQs (1)