< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Equinox
< Back to View All
Power Steering Pumps
- Department
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Equinox Power Steering Pump
PartNumber: 13577682
Product Specifications- Notes: 3.0 & 3.6 Liter; Equinox, Terrain
- Other Names: Power Steering Pump
- Item Dimensions: 11.2 x 6.4 x 6.4 inches
- Item Weight: 3.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25950529, 13576573, 13505835
- Part Description: 2010 Chevrolet Equinox Power Steering Pump
Vehicle Fitment- 2010 Chevrolet Equinox | LS, LT, LTZ | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
$135.66 MSRP:$255.96You Save: $120.30 (47%)
Cardone Reman® Remanufactured Power Steering Pump w/o Reservoir for 2010 Chevrolet Equinox
PartNumber: 21-4072Product Specifications- Notes: For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line filter available;Supplied w/o Reservoir
- Hose Port: O-Ring
- Housing Material: Aluminum
- Import or Domestic: Import
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Hose Barb
- Reservoir: Without
- Thread Size: M16 x 1.5
- Part Description: 2010 Chevrolet Equinox Remanufactured Power Steering Pump w/o Reservoir
Vehicle Fitment- 2010 Chevrolet Equinox | All Trims | 6 Cyl 3.0L
$110.00
FAQ for Power Steering Pump Repair
Q: What should you remove before replacing the Power Steering Pump Pulley?
A:
You should remove the power steering pump.
By Bob
GM Specialist
01/11/2022Q: What tools can be used to install the power steering pump pulley?
A:
You can use the J - 25033 - C - Installer.
By Bob
GM Specialist
01/11/2022Q: What should you remove before replacing the Power Steering Pump?
A:
You should remove the intake manifold cover, remove as much power steering fluid from the upper power steering fluid reservoir as possible, remove the right front tire and wheel assembly and remove the drive belt from the power steering pump pulley.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the power steering pump bolts?
A:
You can tighten the bolts to 23 Nm (17 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What tools can be used to remove the power steering pump pulley?
A:
You can use the J - 25034 - C - Remover.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the power steering pump have?
A:
The power steering pump has a total of 3 bolts.
By Bob
GM Specialist
01/11/2022Q: What should you ensure when replacing the Power Steering Pump Pulley?
A:
You should ensure the axial tolerance of the power steering pump pulley on the shaft is within 0.25 mm (0.010 in).
By Bob
GM Specialist
01/11/2022See more FAQs (2)