< Back ×
2010 Chevrolet Equinox Tie Rod End
My Vehicle Change Vehicle
2010 Chevrolet Equinox
< Back to View All
Steering Arms, Links & Rods
- Department
- Series
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Equinox Outer Tie Rod
PartNumber: 19207057$131.84 MSRP:$218.23You Save: $86.39 (40%)Product Specifications- Notes: 2.4 Liter; Equinox, Terrain
- Location: Driver Side; Passenger Side
- Other Names: Outer Tie Rod
- Item Dimensions: 7.0 x 4.4 x 4.5 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Equinox Outer Tie Rod
Vehicle Fitment- 2010 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
Product Specifications- Dust Boot Included: Yes
- End 1 Gender: Female
- End 1 Thread Diameter: 0.55; 14.00
- End 1 Thread Direction: Clockwise
- Greasable: No
- Grease Fitting Included: No
- Height: 100.00
- Item Grade: Standard Replacement
- Length: 144.00
- Length Stud Center to End: 122.93; 4.84
- Mounting Hardware Included: Yes
- UPC: 689604287071
- Width: 44.00
- Part Description: 2010 Chevrolet Equinox Outer Steering Tie Rod End
Vehicle Fitment- 2010 Chevrolet Equinox | All Trims | All Engines
OEM (Genuine) 2010 Chevrolet Equinox Outer Tie Rod
PartNumber: 19210064$84.49 MSRP:$139.86You Save: $55.37 (40%)Product Specifications- Notes: Equinox, Terrain; 3.0 & 3.6 Liter
- Location: Driver Side; Passenger Side
- Other Names: Outer Tie Rod
- Item Dimensions: 7.0 x 4.3 x 4.5 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Equinox Outer Tie Rod
Vehicle Fitment- 2010 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
Product Specifications- End 1 Thread Direction: Clockwise
- End 1 Thread Pitch: 1.50
- Height: 40.00
- Item Grade: Standard Replacement
- Length: 340.00
- Mounting Hardware Included: Yes
- UPC: 689604288108
- Width: 40.00
- Part Description: 2010 Chevrolet Equinox Inner Steering Tie Rod End
Vehicle Fitment- 2010 Chevrolet Equinox | All Trims | 4 Cyl 2.4L
Centric® Premium™ Front Inner Steering Tie Rod End for 2010 Chevrolet Equinox
PartNumber: 612.66010$23.65Product Specifications- UPC: 889590016697
- Part Description: 2010 Chevrolet Equinox Premium™ Front Inner Steering Tie Rod End
Vehicle Fitment- 2010 Chevrolet Equinox | All Trims | 6 Cyl 3.0L
- Product Specifications
- Per Car Qty: 2
- UPC: 889590016680
- Part Description: 2010 Chevrolet Equinox Premium™ Steering Tie Rod End
Vehicle Fitment- 2010 Chevrolet Equinox | All Trims | All Engines
Product Specifications- UPC: 805890804949
- Part Description: 2010 Chevrolet Equinox Premium™ Front Inner Steering Tie Rod End
Vehicle Fitment- 2010 Chevrolet Equinox | All Trims | 4 Cyl 2.4L
Product Specifications- UPC: 805890804956
- Part Description: 2010 Chevrolet Equinox Premium™ Inner Tie Rod End
Vehicle Fitment- 2010 Chevrolet Equinox | All Trims | All Engines
FAQ for Tie Rod End Repair
Q: What is the recommended torque for the steering linkage outer tie rod nut?
A:
You can tighten the nut to 60 Nm (44 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you tighten the adjustment link to the knuckle bolt and nut?
A:
You can tighten the bolt and nut to 160 Nm (118 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you tighten the adjustment link to support the bolt and nut?
A:
You can tighten the bolt and nut to 160 Nm (118 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How do you install the Steering Linkage Inner Tie Rod?
A:
You can position the new steering gear rack thrust washer, install the steering linkage inner tie rod, place a soft jaw pipe wrench or soft jaw pliers on the flat surface of the steering gear rack, place a torque wrench with a crows foot wrench attachment on the flats of the inner tie rod housing, bend the tabs over on the steering gear rack thrust washer and install the steering gear boot.
By Bob
GM Specialist
01/11/2022Q: What tools can be used to separate the steering linkage outer tie rod from the steering knuckle?
A:
You can use the J 24319-B Steering Linkage and Tie Rod Puller.
By Bob
GM Specialist
01/11/2022Q: What should you remove before replacing the Steering Linkage Outer Tie Rod?
A:
You should remove the front tire and wheel assembly.
By Bob
GM Specialist
01/11/2022Q: How do you replace the Steering Linkage Inner Tie Rod?
A:
You can remove 1 steering gear boot, turn the steering wheel, bend the tabs on the steering gear rack thrust washer, place a soft jaw pipe wrench or soft jaw pliers on the flat surface of the steering gear rack, place a crows foot wrench on the flats of the inner tie rod housing, rotate the steering linkage inner tie rod housing counterclockwise and then remove the steering gear rack thrust washer.
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the adjusted link?
A:
You should raise the vehicle and remove the rear wheel and tire assembly.
By Bob
GM Specialist
01/11/2022See more FAQs (3)