< Back ×
2010 Chevrolet Equinox Windshield Wiper Arms
My Vehicle Change Vehicle
2010 Chevrolet Equinox
< Back to View All
Wipers & Washers
- Department
- Prices
$57.69 MSRP:$104.44You Save: $46.75 (45%)Product Specifications- Notes: Equinox, Terrain; Left
- Location: Driver Side
- Other Names: Front Arm, Wiper Arm
- Item Dimensions: 26.6 x 3.4 x 4.9 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22873208, 20903479, 25788758
- Part Description: 2010 Chevrolet Equinox Wiper Arm
Vehicle Fitment- 2010 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- $69.17 MSRP:
$125.22You Save: $56.05 (45%)Product Specifications- Notes: Equinox, Terrain; Right
- Location: Passenger Side
- Other Names: Front Arm, Wiper Arm
- Item Dimensions: 29.8 x 8.0 x 3.2 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22873207, 25788778
- Part Description: 2010 Chevrolet Equinox Wiper Arm
Vehicle Fitment- 2010 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$40.46 MSRP:$73.24You Save: $32.78 (45%)Product Specifications- Notes: Equinox, Terrain
- Other Names: Rear Arm, Wiper Arm
- Item Dimensions: 11.9 x 1.7 x 1.4 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 23125498, 20933734, 20999458, 25788782
- Part Description: 2010 Chevrolet Equinox Rear Arm
Vehicle Fitment- 2010 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
FAQ for Windshield Wiper Arms Repair
Q: What should you do before replacing the Windshield Wiper Arm (Equinox Driver Side)?
A:
You should open and suitably support the hood assembly before replacing the Windshield Wiper Arm.
By Bob
GM Specialist
01/11/2022Q: What should you do while securing the wiper arm nut?
A:
You should hold the wiper blade in position.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the windshield wiper arm nut?
A:
You can tighten the nut to 24 Nm (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What can be used to clean the knurls on the wiper motor pivot shaft?
A:
You can use a soft wire brush.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you tighten the rear wiper arm nut?
A:
You can tighten the nut to 8 Nm (71 lb in).
By Bob
GM Specialist
01/11/2022Q: What should you do when installing the new wiper arm onto the pivot shaft?
A:
You should align the wiper blade with the small line in the windshield's lower blackout area.
By Bob
GM Specialist
01/11/2022Q: What is the purpose of lifting the wiper arm nut?
A:
The purpose is to access the wiper arm nut.
By Bob
GM Specialist
01/11/2022See more FAQs (2)