< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Express 3500
< Back to View All
Valves, Valve Covers & Valvetrain
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Express 3500 Push Rods
PartNumber: 10238852
Product Specifications- Notes: Express, Savana
- Other Names: Push Rod
- Item Dimensions: 8.3 x 0.8 x 0.4 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Express 3500 Push Rods
Vehicle Fitment- 2010 Chevrolet Express 3500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
$17.32 MSRP:$28.64You Save: $11.32 (40%)OEM (Genuine) 2010 Chevrolet Express 3500 Push Rods
PartNumber: 97240416
Product Specifications- Notes: Express, Savana
- Other Names: Push Rod
- Item Dimensions: 12.4 x 8.2 x 1.0 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 97367163
- Part Description: 2010 Chevrolet Express 3500 Push Rods
Vehicle Fitment- 2010 Chevrolet Express 3500 | Base, LS, LT | 8 Cyl 6.6 L DIESEL
$10.30 MSRP:$16.33You Save: $6.03 (37%)
FAQ for Pushrod Repair
Q: What is the installation procedure for the valve rocker arm and push rod?
A:
The procedure is to lubricate the valve rocker arms and pushrods with clean engine oil, the flange of the valve rocker arm bolts with clean engine oil, and the flange or washer surface of the bolt that will contact the valve rocker arm, install the valve rocker arm pivot support, the pushrods and the rocker arms and bolts, rotate the crankshaft until the number one piston is at the top dead center (TDC) of the compression stroke, tighten the valve rocker arm bolts, rotate the crankshaft 360 degrees, tighten the valve rocker arm bolts, and then install the valve rocker arm cover.
By Bob
GM Specialist
02/11/2022Q: How do you remove the valve rocker arm and push rod?
A:
You need to remove the valve rocker arm cover, the valve rocker arm bolts, the valve rocker arms, the valve rocker arm pivot support, and the pushrods.
By Bob
GM Specialist
02/11/2022