< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Impala
< Back to View All
Oxygen Sensors
- Department
- Product Fit
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Impala Rear Oxygen Sensor
PartNumber: 12608662
Product Specifications- Notes: Impala, Monte Carlo; 3.5L, 3.9L; Rear; 3.5 & 3.9 Liter W/O Flex Fuel; 3.5 & 3.9 Liter W/Flex Fuel
- Other Names: Oxygen Sensor, Rear Oxygen Sensor
- Item Dimensions: 8.4 x 3.3 x 3.4 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Impala Rear Oxygen Sensor
Vehicle Fitment- 2010 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX
$62.73 MSRP:$118.38You Save: $55.65 (48%)
Denso® Universal Fit Oxygen Sensor for 2010 Chevrolet Impala
PartNumber: 234-4212Product Specifications- Notes: OE Quality Universal Replacement Sensor
- Installation Type: Screw
- O2 Sensor Configuration: Universal
- OE Part Number: 5C5Z9F472AA, 88Z9F472AB
- Position: Upstream
- Sensor Type: Heated
- Thread Diameter: 0.71" (18 mm)
- UPC: 042511142121
- Wire Harness Length: 11.77" (299 mm)
- Wires Quantity: 4 Wire Leads
- Part Description: 2010 Chevrolet Impala Universal Fit Oxygen Sensor
Vehicle Fitment- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.5L
- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.9L
$38.90
Delphi® Oxygen Sensor for 2010 Chevrolet Impala
PartNumber: ES20320Product Specifications- Notes: 12in Length
- Connector Shape: Square
- Position: Rear
- Terminal Quantity: 4
- Terminal Type: Blade
- UPC: 689604188316
- Wire Harness Length: 12.4" (310 mm)
- Wrench Size: 0.88" (22 mm)
- Part Description: 2010 Chevrolet Impala Oxygen Sensor
Vehicle Fitment- 2010 Chevrolet Impala | LS | 6 Cyl 3.5L
- 2010 Chevrolet Impala | LT | 6 Cyl 3.5L
- 2010 Chevrolet Impala | LTZ | 6 Cyl 3.9L
- 2010 Chevrolet Impala | LS | 6 Cyl 3.9L
$62.83
NTK® OE Type Oxygen Sensor for 2010 Chevrolet Impala
PartNumber: 21546Product Specifications- Notes: B1S1; OE Equivalent Design;OE Equivalent Design
- Mounting Type: Threaded
- Sensor Type: Heated
- Thread Diameter: 18.000
- Universal Or Specific Fit: Specific
- UPC: 087295215463
- Wire Quantity: 4
- Wiring Harness Length: 16.5000
- Part Description: 2010 Chevrolet Impala OE Type Oxygen Sensor
Vehicle Fitment- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.5L
- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.9L
$45.42
Walker Products® Premium Oxygen Sensor for 2010 Chevrolet Impala
PartNumber: 250-24470Product Specifications- Notes: B1S1;B2S1
- Connector Gender: Female
- Location: B2S1 Sensor
- Overall Length: 17.64"(448.056 mm)
- Position: Upstream Passenger Side
- Sensor Type: Heated
- Thread Diameter: 0.71"(18.0 mm)
- UPC: 724620043529
- Wire Gauge Measurement: 20 Gauge
- Wire Harness Length: 14.09"(357.886 mm)
- Wires Quantity: 4 Wire Leads
- Part Description: 2010 Chevrolet Impala Premium Oxygen Sensor
Vehicle Fitment- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.5L
- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.9L
$35.97
OEM (Genuine) 2010 Chevrolet Impala Front Oxygen Sensor
PartNumber: 12584925
Product Specifications- Notes: Impala, Monte Carlo; 3.5L, 3.9L; Front; 3.5 & 3.9 Liter W/O Flex Fuel; 3.5 & 3.9 Liter W/Flex Fuel
- Other Names: Front Oxygen Sensor, Oxygen Sensor
- Item Dimensions: 8.6 x 3.4 x 3.4 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Impala Front Oxygen Sensor
Vehicle Fitment- 2010 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
$83.54 MSRP:$157.63You Save: $74.09 (48%)
Denso® Oxygen Sensor for 2010 Chevrolet Impala
PartNumber: 234-4254Product Specifications- Notes: DENSO is the OE Manufacturer / Oxygen Sensor
- Connector Gender: Female
- Installation Type: Screw
- O2 Sensor Configuration: Direct Fit
- Position: Downstream Driver Side
- Sensor Type: Heated
- Thread Diameter: 0.71" (18 mm)
- UPC: 042511117082
- Wire Harness Length: 10.83" (275.1 mm)
- Wires Quantity: 4 Wire Leads
- Part Description: 2010 Chevrolet Impala Oxygen Sensor
Vehicle Fitment- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.5L
- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.9L
$38.69
Delphi® Oxygen Sensor for 2010 Chevrolet Impala
PartNumber: ES20007Product Specifications- Notes: 12in Length
- Connector Shape: Square
- Position: Rear
- Terminal Quantity: 4
- Terminal Type: Blade
- UPC: 689604145524
- Wire Harness Length: 12.4" (310 mm)
- Wrench Size: 0.88" (22 mm)
- Part Description: 2010 Chevrolet Impala Oxygen Sensor
Vehicle Fitment- 2010 Chevrolet Impala | LS | 6 Cyl 3.5L
- 2010 Chevrolet Impala | LT | 6 Cyl 3.5L
- 2010 Chevrolet Impala | LTZ | 6 Cyl 3.9L
- 2010 Chevrolet Impala | LS | 6 Cyl 3.9L
$59.30Walker Products® Premium Oxygen Sensor for 2010 Chevrolet Impala
PartNumber: 250-24736Product Specifications- Notes: B1S2
- Connector Gender: Male
- Location: B2S2 Sensor
- Overall Length: 16.85"(427.99 mm)
- Position: Downstream Passenger Side
- Sensor Type: Heated
- Thread Diameter: 0.71"(18.0 mm)
- UPC: 724620015199
- Wire Gauge Measurement: 20 Gauge
- Wire Harness Length: 13.31"(338.074 mm)
- Wires Quantity: 4 Wire Leads
- Part Description: 2010 Chevrolet Impala Premium Oxygen Sensor
Vehicle Fitment- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.5L
- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.9L
$34.94
Denso® Oxygen Sensor for 2010 Chevrolet Impala
PartNumber: 234-4668Product Specifications- Notes: DENSO is the OE Manufacturer / Oxygen Sensor
- Connector Gender: Male
- Installation Type: Screw
- O2 Sensor Configuration: Direct Fit
- Position: Upstream
- Sensor Type: Heated
- Thread Diameter: 0.71" (18 mm)
- UPC: 042511112568
- Wire Harness Length: 15.75" (400.1 mm)
- Wires Quantity: 4 Wire Leads
- Part Description: 2010 Chevrolet Impala Oxygen Sensor
Vehicle Fitment- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.5L
- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.9L
$31.30
Walker Products® Oxygen Sensor for 2010 Chevrolet Impala
PartNumber: 350-34494Product Specifications- Notes: Downstream; Front; B1S2
- Connector Gender: Male
- Connector Shape: Radiused Polygon
- Installation Type: Threaded
- Location: B1S2
- Overall Length: 16.85"
- Position: Downstream Passenger Side
- Sensor Type: Heated
- Thread Diameter: 18.0 mm
- UPC: 724620093081
- Wire Gauge Measurement: 20 Gauge
- Wire Harness Length: 13.31"
- Wires Quantity: 4 Wire Leads
- Part Description: 2010 Chevrolet Impala Oxygen Sensor
Vehicle Fitment- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.5L
- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.9L
$31.68
Walker Products® Oxygen Sensor for 2010 Chevrolet Impala
PartNumber: 350-34581Product Specifications- Notes: Upstream; Front; B2S1;Upstream; Rear; B1S1
- Connector Gender: Female
- Connector Shape: Radiused Polygon
- Installation Type: Threaded
- Location: B1S1
- Overall Length: 17.64"
- Position: Upstream Passenger Side
- Sensor Type: Heated
- Thread Diameter: 18.0 mm
- UPC: 724620093937
- Wire Gauge Measurement: 20 Gauge
- Wire Harness Length: 14.09"
- Wires Quantity: 4 Wire Leads
- Part Description: 2010 Chevrolet Impala Oxygen Sensor
Vehicle Fitment- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.5L
- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.9L
$28.68
FAQ for Oxygen Sensor Repair
Q: How do I install the Heated Oxygen Sensor 1?
A:
If reusing the old sensor, coat the threads with an anti-seize compound. Install the sensor to the exhaust manifold and connect the electrical connector. Next, install the retainer and the oxygen sensor electrical connector to the ignition coil bracket.
By Omar
GM Specialist
30/03/2022Q: How do I remove the Heated Oxygen Sensor 1?
A:
Start with removing the connector position assurance retainer. Next disconnect the heater oxygen sensor electrical connector. Remove the oxygen sensor electrical connector from the ignition coil bracket and the HO2S from the exhaust manifold.
By Omar
GM Specialist
29/03/2022Q: What are some reasons the oxygen sensor can get contaminated?
A:
The use of the wrong sealant, excessive coolant, or excessive oil consumption.
By Omar
GM Specialist
26/03/2022Q: What is the removal process for oxygen sensor 2?
A:
You need to remove the CPA retainer, disconnect the connector, and remove the connector clip from the heat shield so that you can remove the oxygen sensor from the catalytic converter.
By Bob
GM Specialist
24/03/2022Q: What is the torque spec for the oxygen sensor?
A:
42 Nm (31 ft./lbs.).
By Bob
GM Specialist
23/03/2022Q: What should I be cautious about when servicing the Heated Oxygen and Oxygen Sensor?
A:
Do not apply contact cleaner or other materials to the sensor or vehicle harness connectors, do not damage the sensor pigtail and harness wires in such a way that the wires inside are exposed, do not remove or defeat the oxygen sensor ground wire and check that the peripheral seal remains intact on the vehicle harness connector.
By Bob
GM Specialist
22/03/2022Q: When replacing the HO2 sensor what should also be done?
A:
You will need to perform a code clear with a scan tool, regardless of whether or not a DTC is set and HO2S heater resistance learns reset with a scan tool, where available.
By Omar
GM Specialist
22/03/2022See more FAQs (2)