< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Impala
< Back to View All
Wheel Hubs, Bearings & Seals
- Department
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Impala King Pin Screw
PartNumber: 11570339
Product Specifications- Location: Driver Side; Passenger Side
- Item Dimensions: 1.4 x 1.0 x 0.6 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 11515720
- Part Description: 2010 Chevrolet Impala King Pin Screw
Vehicle Fitment- 2010 Chevrolet Impala | 50th Anniversary Edition, Eco, LS, LT, LTZ, Police, Premier, SS | 4 Cyl 2.4 L ELECTRIC/GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$5.05 MSRP:$7.99You Save: $2.94 (37%)
Dorman® OE Solutions Front Wheel Hub Bolt for 2010 Chevrolet Impala
PartNumber: 917-503Product Specifications- Material: Steel
- Package Contents: 3 Bolts
- UPC: 889245012166
- Part Description: 2010 Chevrolet Impala OE Solutions Front Wheel Hub Bolt
Vehicle Fitment- 2010 Chevrolet Impala | All Trims | All Engines
$13.82
OEM (Genuine) 2010 Chevrolet Impala Front Hub
PartNumber: 19259596
Product Specifications- Notes: W/ABS; Impala, Monte Carlo; W/ABS
- Location: Driver Side; Passenger Side
- Item Dimensions: 8.5 x 7.1 x 7.0 inches
- Item Weight: 11.70 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19433930
- Part Description: 2010 Chevrolet Impala Front Hub
Vehicle Fitment- 2010 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$219.54 MSRP:$414.26You Save: $194.72 (48%)
OEM (Genuine) 2010 Chevrolet Impala Hub Assembly Stud
PartNumber: 9595178
Product Specifications- Location: Driver Side; Passenger Side
- Item Dimensions: 5.0 x 4.0 x 3.5 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Impala Hub Assembly Stud
Vehicle Fitment- 2010 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$3.42 MSRP:$5.42You Save: $2.00 (37%)
OEM (Genuine) 2010 Chevrolet Impala Bolt, Rear Wheel Hub
PartNumber: 11610493
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Hub & Bearing Bolt
- Item Dimensions: 2.2 x 1.2 x 0.7 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 18023050
- Part Description: 2010 Chevrolet Impala Bolt, Rear Wheel Hub
Vehicle Fitment- 2010 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$4.54 MSRP:$7.20You Save: $2.66 (37%)
FAQ for Wheel Hub Bolt Repair
Q: How can you identify metric wheel studs?
A:
They will have an M or be stamped metric on the face of the bolt.
By Bob
GM Specialist
30/03/2022Q: How do I install the Wheel Stud?
A:
Start with installing a replacement stud in the wheel hub, next add enough washers to draw the stud into the hub. Install the wheel nut with the flat side against the washers. Tighten the wheel nut until the wheel stud is fully seated against the hub flange. Back off the wheel nut and remove the washers. Install the support, the rear wheel bearing/hub assembly, and the wheel and tire assembly.
By Bob
GM Specialist
29/03/2022Q: How do I remove the Wheel Stud?
A:
Start with lifting and supporting the vehicle, next remove the wheel and tire assembly and the rear wheel bearing/hub assembly. Then separate the support from the rear hub. Use the tie rod puller to extract the stud from the hub.
By Omar
GM Specialist
29/03/2022