< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Traverse
< Back to View All
Transmissions Components & Shifters
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Traverse Shift Control Cable
PartNumber: 23256076
Product Specifications- Notes: Enclave, Traverse
- Other Names: Control Cable, Shift Control Cable
- Item Dimensions: 14.1 x 14.3 x 6.3 inches
- Item Weight: 2.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25824455, 25809651, 20922587, 22977291, 22833771, 25882560
- Part Description: 2010 Chevrolet Traverse Shift Control Cable
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
$36.34 MSRP:$60.15You Save: $23.81 (40%)
FAQ for Automatic Transmission Shifter Cable Repair
Q: How to adjust the range selector lever cable?
A:
You shall set the park brake and chock the wheels, release the range select cable adjuster clip, slide the two halves of the range select cable together until all free play is removed, depress the adjuster clip, pull both halves of the range select cable in opposite directions to verify the cable adjuster is secured, and check the transmission range select lever in all gear selections for proper operation.
By Bob
GM Specialist
01/11/2022Q: How do I install the Range Selector Lever Cable?
A:
Install the transmission range selector lever cable, the grommet, the cable bracket, the transmission manual shift lever, and the transmission control lever base. Connect the transmission range selector lever cable terminal to the shift lever pin. Adjust the automatic transmission range selector lever cable and release the parking brake.
By Omar
GM Specialist
12/03/2022Q: How do I remove the Range Selector Lever Cable?
A:
Start with applying the parking brake and chock the wheels. Then remove the floor console left extension panel. Disconnect the transmission range selector lever cable terminal from the shift lever pin. Remove the transmission range selector cable from the transmission control lever base. Disconnect the transmission range selector lever cable terminal and release the transmission range selector lever cable from the cable bracket and remove the transmission range selector lever cable from the vehicle.
By Omar
GM Specialist
11/03/2022Q: What is the recommended bolt torque for the transmission range selector lever connector cable bracket bolt?
A:
The recommended bolt torque is 25 Nm (18 LB-FT).
By Bob
GM Specialist
05/03/2022Q: What will need to be done before removing the Range Selector Lever Cable Bracket?
A:
You will need to set the parking brake and chock the wheels. You will also need to remove the air cleaner assembly.
By Bob
GM Specialist
03/03/2022