< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Traverse
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Traverse Brake Booster
PartNumber: 84158418
Product Specifications- Notes: Enclave, Traverse
- Other Names: Brake Booster
- Item Dimensions: 13.1 x 11.9 x 11.6 inches
- Item Weight: 7.80 Pounds
- Replaced by: 19432798
- Part Description: 2010 Chevrolet Traverse Brake Booster
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
$120.30 MSRP:$217.76You Save: $97.46 (45%)
Cardone Reman® Remanufactured Vacuum Power Brake Booster w/o Master Cylinder for 2010 Chevrolet Traverse
PartNumber: 54-71937Product Specifications- Notes: without Master Cylinder
- Booster Outlets: 1
- Booster Type: Vacuum
- Casting Material: Steel
- Color: Powder Coated Gray
- Diaphragm Diameter: 9.673"
- Diaphragm Type: Single
- E-Waste: No
- Master Cylinder: Without
- Master Cylinder Stud Thread Size: M8 x 1.25
- Material: Steel
- Part Description: 2010 Chevrolet Traverse Remanufactured Vacuum Power Brake Booster w/o Master Cylinder
Vehicle Fitment- 2010 Chevrolet Traverse | All Trims | All Engines
$73.52OEM (Genuine) 2010 Chevrolet Traverse Power Booster
PartNumber: 84635614
Product Specifications- Other Names: Brake Booster, Power Booster
- Item Dimensions: 13.6 x 12.4 x 11.9 inches
- Item Weight: 8.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20876879, 20831871, 84158418
- Replaced by: 19432798
- Part Description: 2010 Chevrolet Traverse Power Booster
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
$120.30 MSRP:$217.76You Save: $97.46 (45%)
Centric® Power Brake Booster for 2010 Chevrolet Traverse
PartNumber: 160.81154Product Specifications- Notes: 2 Outlets
- UPC: 805890577508
- Part Description: 2010 Chevrolet Traverse Power Brake Booster
Vehicle Fitment- 2010 Chevrolet Traverse | All Trims | All Engines
Centric® Power Brake Booster for 2010 Chevrolet Traverse
PartNumber: 160.81265Product Specifications- Notes: 1 Outlet
- UPC: 889590294491
- Part Description: 2010 Chevrolet Traverse Power Brake Booster
Vehicle Fitment- 2010 Chevrolet Traverse | All Trims | All Engines
FAQ for Brake Booster Repair
Q: What should be noticed while installing the power vacuum brake booster?
A:
You shall inspect the vacuum brake booster to the dash panel gasket for damage and replace it if necessary.
By Bob
GM Specialist
01/11/2022Q: How to remove the power brake booster auxiliary pump?
A:
You shall remove the fuel injector sight shield, the power brake booster auxiliary pump nuts, the power brake booster auxiliary pump bolts, the pump, the power brake booster auxiliary pump insulators, sleeves, the power brake booster auxiliary pump bracket bolts, and the bracket.
By Bob
GM Specialist
01/11/2022Q: What should be noticed while removing the power vacuum brake booster?
A:
It is not necessary to disconnect the brake pipes from the BPMV assembly or the master cylinder.
By Bob
GM Specialist
01/11/2022Q: How to install the power brake booster auxiliary pump?
A:
You shall install the power brake booster auxiliary pump bracket, the power brake booster auxiliary pump insulators and sleeves, the pump, the power brake booster auxiliary pump electrical connector, and the fuel injector sight shield.
By Bob
GM Specialist
01/11/2022Q: How to remove the power brake booster vacuum sensor?
A:
You shall turn the ignition switch to the OFF position, disconnect the power brake booster vacuum sensor electrical connector, the power brake booster check valve with a vacuum sensor and hose assembly from the brake booster, and remove the power brake booster vacuum sensor from the vacuum hose.
By Bob
GM Specialist
01/11/2022Q: How to install the power brake booster vacuum sensor?
A:
You shall install the power brake booster vacuum sensor, the power brake booster check valve with a vacuum sensor and hose assembly, and the windshield washer solvent heater, if equipped.
By Bob
GM Specialist
01/11/2022Q: How do you remove the power brake booster vacuum sensor?
A:
You can remove the windshield washer solvent heater, disconnect the electrical connector for the vacuum sensor, and remove the vacuum sensor.
By Bob
GM Specialist
10/03/2022Q: What is the installation procedure for the power brake booster vacuum sensor?
A:
The procedure is to install the power brake booster vacuum sensor, secure the clamp, and connect the electrical connector for the power brake booster sensor.
By Bob
GM Specialist
08/03/2022Q: What is the power vacuum brake installation procedure?
A:
Install the vacuum brake booster, and the 4 vacuum brake booster nuts and tighten the nuts 25 Nm. Next, install the intermediate steering shaft, the brake pedal pushrod retaining clip, and the driver knee bolster. After that, install the left side instrument panel insulator panel, install the 2 brake master cylinder nuts and tighten the nuts to 20 Nm. Install the 2 nuts to the BPMV and bracket assembly. Tighten the nuts to 20 Nm and install the vacuum brake booster vacuum sensor. Finally, install the windshield washer solvent heater and install the air cleaner assembly.
By Bob
GM Specialist
08/03/2022See more FAQs (4)