< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Traverse
< Back to View All
Driveline, Axles & 4WD
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Traverse Joint Asm-Rear Wheel Drive Shaft Cv Outer
PartNumber: 15855634
Product Specifications- Notes: Enclave, Traverse; W/AWD
- Location: Passenger Side; Driver Side
- Other Names: Outer CV Joint, Outer Joint
- Item Dimensions: 8.2 x 3.2 x 3.1 inches
- Item Weight: 4.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Traverse Joint Asm-Rear Wheel Drive Shaft Cv Outer
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ | 6 Cyl 3.6 L GAS
OEM (Genuine) 2010 Chevrolet Traverse Joint Asm-Front Wheel Drive Shaft Cv
PartNumber: 25940424
Product Specifications- Notes: Traverse
- Location: Driver Side; Passenger Side
- Other Names: Outer CV Joint, Outer Joint Assembly
- Item Dimensions: 8.9 x 6.8 x 7.4 inches
- Item Weight: 5.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Traverse Joint Asm-Front Wheel Drive Shaft Cv
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
FAQ for Cv Joint Repair
Q: What kind of tools will be required in the replacement of the rear wheel drive shaft outer joint and boot?
A:
The tools required include CH 48894-Drive Axle Boot Clamp Pliers, J 8059-Snap Ring Pliers, and J 35910-Drive Axle Boot Clamp Pliers.
By Bob
GM Specialist
01/11/2022Q: What should be noticed while assembling the rear wheel drive shaft outer joint and boot?
A:
When measuring the clamp end gap dimension, the gap should not exceed 1.8 mm (0.07 in) for vehicles with X88 and 2.6 mm (0.10 in) for vehicles with Z88/W49/WDA.
By Bob
GM Specialist
01/11/2022Q: How to remove the front wheel drive shaft inner joint and boot?
A:
You shall remove the wheel drive shaft, the small boot clamp, and the large boot clamp from the boot, the boot, the inner tripot housing, the outer tripot spider retaining ring, the tripot spider, and the wheel drive shaft boot.
By Bob
GM Specialist
01/11/2022Q: What should be noted when disassembling the rear wheel drive shaft inner joint and boot?
A:
You must not cut through the wheel drive shaft inboard or outboard boot during service.
By Bob
GM Specialist
01/11/2022Q: How to install the front wheel drive shaft inner joint and boot?
A:
The proper way is to install the boot, the tripot spider, the outer tripot spider retaining ring, the tripot housing, the wheel drive shaft boot, and the wheel drive shaft.
By Bob
GM Specialist
01/11/2022Q: What kind of tools will be required in the replacement of the rear wheel drive shaft inner joint and boot?
A:
The tools required include CH 48894-Drive Axle Seal Clamp Pliers and J 35910-Drive Axle Boot Clamp Pliers.
By Bob
GM Specialist
01/11/2022Q: How do you disassemble the front wheel drive shaft inner joint and boot?
A:
You can remove the wheel drive shaft, the boot clamp, the boot, and the tripot spider.
By Omar
GM Specialist
11/03/2022Q: How do you remove the RWD shaft inner joint and boot?
A:
You can remove the wheel drive shaft, the CV joint, and the boot.
By Omar
GM Specialist
10/03/2022Q: What is the installation procedure for the RWD shaft inner joint and boot?
A:
The procedure is to install the CV joint boot, the clamp, the outer CV joint, and the wheel drive shaft.
By Omar
GM Specialist
08/03/2022Q: What is the proper way to assemble the outer joint and boot?
A:
The proper way is to install the retaining ring, the CV joint, and the wheel drive shaft.
By Omar
GM Specialist
08/03/2022See more FAQs (9)