< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Traverse
< Back to View All
Oxygen Sensors
- Department
- Product Fit
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Traverse Lower Oxygen Sensor
PartNumber: 12634061
Product Specifications- Notes: Enclave, Traverse; Front
- Location: Driver Side; Passenger Side
- Item Dimensions: 7.8 x 2.5 x 2.2 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12607333
- Part Description: 2010 Chevrolet Traverse Lower Oxygen Sensor
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ | 6 Cyl 3.6 L GAS
$44.06 MSRP:$79.74You Save: $35.68 (45%)
Denso® Oxygen Sensor for 2010 Chevrolet Traverse
PartNumber: 234-4816Product Specifications- Notes: OE Quality Replacement Sensor
- Connector Gender: Female
- Installation Type: Screw
- O2 Sensor Configuration: Direct Fit
- Position: Downstream
- Sensor Type: Heated
- Thread Diameter: 0.71" (18 mm)
- UPC: 042511113282
- Wire Harness Length: 20.59" (523 mm)
- Wires Quantity: 4 Wire Leads
- Part Description: 2010 Chevrolet Traverse Oxygen Sensor
Vehicle Fitment- 2010 Chevrolet Traverse | All Trims | 6 Cyl 3.6L
$55.88
Delphi® Oxygen Sensor for 2010 Chevrolet Traverse
PartNumber: ES20012Product Specifications- Connector Shape: Triangular
- Position: Rear
- Terminal Quantity: 4
- Terminal Type: Blade
- UPC: 689604147337
- Wire Harness Length: 20.8" (520 mm)
- Wrench Size: 0.88" (22 mm)
- Part Description: 2010 Chevrolet Traverse Oxygen Sensor
Vehicle Fitment- 2010 Chevrolet Traverse | LS | 6 Cyl 3.6L
- 2010 Chevrolet Traverse | LT | 6 Cyl 3.6L
- 2010 Chevrolet Traverse | LTZ | 6 Cyl 3.6L
$54.81
Spectra Premium® Oxygen Sensor for 2010 Chevrolet Traverse
PartNumber: OS5461Product Specifications- Notes: Bank 1 Sensor 2;Bank 2 Sensor 2;Bank 1 Sensor 1;Bank 2 Sensor 1
- Connector Gender: Female
- Connector Shape: Trapeze
- Installation Type: Screw
- Overall Length: 22 5/8"
- Position: Downstream
- Sensor Type: Heated - Zirconia
- Terminal Quantity: 4
- Thread: M18 X 1.5 mm
- UPC: 671607159714
- Wrench Size: 0.88" (22 mm)
- Part Description: 2010 Chevrolet Traverse Oxygen Sensor
Vehicle Fitment- 2010 Chevrolet Traverse | All Trims | 6 Cyl 3.6L
$45.52
Walker Products® Premium Oxygen Sensor for 2010 Chevrolet Traverse
PartNumber: 250-24649Product Specifications- Connector Gender: Male
- Overall Length: 21.57"(547.878 mm)
- Position: Upstream Rear
- Sensor Type: Heated
- Thread Diameter: 0.71"(18.0 mm)
- UPC: 724620039720
- Wire Gauge Measurement: 20 Gauge
- Wire Harness Length: 18.03"(457.962 mm)
- Wires Quantity: 4 Wire Leads
- Part Description: 2010 Chevrolet Traverse Premium Oxygen Sensor
Vehicle Fitment- 2010 Chevrolet Traverse | All Trims | 6 Cyl 3.6L
$37.92
OEM (Genuine) 2010 Chevrolet Traverse Rear Oxygen Sensor
PartNumber: 12616125
Product Specifications- Notes: Enclave, Traverse; Rear
- Location: Driver Side; Passenger Side
- Other Names: Oxygen Sensor, Rear Oxygen Sensor
- Item Dimensions: 8.5 x 3.3 x 3.4 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Traverse Rear Oxygen Sensor
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ | 6 Cyl 3.6 L GAS
$76.67 MSRP:$144.66You Save: $67.99 (47%)
Denso® Oxygen Sensor for 2010 Chevrolet Traverse
PartNumber: 234-4815Product Specifications- Notes: OE Quality Replacement Sensor
- Connector Gender: Female
- Installation Type: Screw
- O2 Sensor Configuration: Direct Fit
- Position: Upstream
- Sensor Type: Heated
- Thread Diameter: 0.71" (18 mm)
- UPC: 042511113275
- Wire Harness Length: 12.24" (310.9 mm)
- Wires Quantity: 4 Wire Leads
- Part Description: 2010 Chevrolet Traverse Oxygen Sensor
Vehicle Fitment- 2010 Chevrolet Traverse | All Trims | 6 Cyl 3.6L
$50.94
Walker Products® Oxygen Sensor for 2010 Chevrolet Traverse
PartNumber: 350-34614Product Specifications- Notes: Downstream; Rear;Downstream; Front;Upstream; Rear;Upstream; Front
- Connector Gender: Male
- Connector Shape: Radiused Polygon
- Installation Type: Threaded
- Overall Length: 21.57"
- Position: Downstream Passenger Side
- Sensor Type: Heated
- Thread Diameter: 18.0 mm
- UPC: 724620094248
- Wire Gauge Measurement: 20 Gauge
- Wire Harness Length: 18.03"
- Wires Quantity: 4 Wire Leads
- Part Description: 2010 Chevrolet Traverse Oxygen Sensor
Vehicle Fitment- 2010 Chevrolet Traverse | All Trims | 6 Cyl 3.6L
$31.41
FAQ for Oxygen Sensor Repair
Q: How to install the heated oxygen sensor-bank 1 sensor 1?
A:
You shall install the HO2S, connect the engine wiring harness electrical connector to the HO2S electrical connector, and install the HO2S electrical connector retainer.
By Bob
GM Specialist
02/11/2022Q: How to remove the heated oxygen sensor-bank 1 sensor 2?
A:
You shall remove the connector position assurance (CPA) retainer, disconnect the heated oxygen sensor (HO2S) electrical connector from the engine wiring harness electrical connector, and remove the HO2S from the exhaust pipe.
By Bob
GM Specialist
02/11/2022Q: How to remove the heated oxygen sensor-bank 2 sensor 2?
A:
You shall remove the connector position assurance (CPA) retainer, disconnect the heated oxygen sensor (HO2S) electrical connector from the engine wiring harness electrical connector, and remove the HO2S from the exhaust pipe.
By Bob
GM Specialist
02/11/2022Q: How to install the heated oxygen sensor-bank 2 sensor 1?
A:
You shall install the HO2S, the HO2S electrical connector retainer, and the fuel injector sight shield.
By Bob
GM Specialist
02/11/2022Q: How to remove the heated oxygen sensor-bank 2 sensor 1?
A:
You shall remove the fuel injector sight shield, the HO2S electrical connector retainer from the engine wiring harness clip, and the HO2S from the exhaust manifold.
By Bob
GM Specialist
02/11/2022Q: What should be noted when replacing the HO2S?
A:
You shall clear a code with a scan tool, regardless of whether or not a DTC is set, and reset HO2S heater resistance learn with a scan tool, where available.
By Bob
GM Specialist
02/11/2022Q: What should be noticed while servicing the heated oxygen sensor?
A:
You shall not apply contact cleaner or other materials to the sensor or vehicle harness connectors, not damage the sensor pigtail and harness wires in such a way that the wires inside are exposed, and not remove or defeat the oxygen sensor ground wire, where applicable.
By Bob
GM Specialist
02/11/2022Q: How to install the heated oxygen sensor-bank 2 sensor 2?
A:
You shall install the HO2S to the exhaust pipe, connect the HO2S electrical connector to the engine wiring harness electrical connector, and install the CPA retainer.
By Bob
GM Specialist
02/11/2022Q: How to install the heated oxygen sensor-bank 1 sensor 2?
A:
You shall install the HO2S to the exhaust pipe, connect the HO2S electrical connector (6) to the engine wiring harness electrical connector, and install the CPA retainer.
By Bob
GM Specialist
02/11/2022Q: How to remove the heated oxygen sensor-bank 1 sensor 1?
A:
You shall disconnect the engine wiring harness electrical connector from the heated oxygen sensor (HO2S) electrical connector, and remove the HO2S electrical connector retainer from the engine wiring harness clip, and the HO2S from the exhaust manifold.
By Bob
GM Specialist
02/11/2022See more FAQs (8)