< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Traverse
< Back to View All
Power Steering Pumps
- Department
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Traverse Pump Asm-P/S
PartNumber: 20954812
Product Specifications- Notes: Enclave, Traverse
- Other Names: Power Steering Pump
- Item Dimensions: 13.5 x 6.6 x 6.4 inches
- Item Weight: 3.60 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 85112727
- Part Description: 2010 Chevrolet Traverse Pump Asm-P/S
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
$139.41 MSRP:$242.65You Save: $103.24 (43%)
Cardone Reman® Remanufactured Power Steering Pump w/o Reservoir for 2010 Chevrolet Traverse
PartNumber: 20-2403Product Specifications- Notes: In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;Supplied w/o Reservoir
- Hose Port: O-Ring
- Housing Material: Aluminum
- Import or Domestic: Domestic
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Reservoir: Without
- Thread Size: M16 x 1.5
- Part Description: 2010 Chevrolet Traverse Remanufactured Power Steering Pump w/o Reservoir
Vehicle Fitment- 2010 Chevrolet Traverse | All Trims | All Engines
$98.30
FAQ for Power Steering Pump Repair
Q: What is the preliminary procedure for servicing the power steering pump pulley?
A:
The procedure is to remove the power steering pump.
By Bob
GM Specialist
01/11/2022Q: How to remove the power steering pump?
A:
You shall remove the fuel injector sight shield, power steering fluid, the drive belt, the steering gear heat shield, the right side catalytic converter, and the power steering pump.
By Bob
GM Specialist
01/11/2022Q: What kind of tools will be required while servicing the power steering pump pulley?
A:
The tools required include J 25033-C-Pulley Installer, J 25034-C-Pulley Remover, and SA9162C-Power Steering Pump Pulley Remover/Installer.
By Bob
GM Specialist
01/11/2022Q: How to install the power steering pump?
A:
You shall install the power steering pump, connect the power steering gear inlet hose fitting and the power steering fluid reservoir outlet hose, and install the right-side catalytic convertor, the steering gear heat shield, the drive belt, and the fuel injector sight shield.
By Bob
GM Specialist
01/11/2022Q: What is the power steering pump installation procedure?
A:
First install the power steering pump to the vehicle, the power steering pump bolts and tighten to 50 Nm. Next, connect the power steering gear inlet hose fitting to the power steering pump and tighten it to 34 Nm. Install the steering gear heat shield, the drive belt, and the fuel injector sight shield.
By Bob
GM Specialist
08/03/2022Q: What is the power steering pump pulley service procedure?
A:
Remove the power steering pump and use the J 25034-C remover/installer for Saturn to remove the power steering pump pulley.
By Omar
GM Specialist
08/03/2022See more FAQs (1)