< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Traverse
< Back to View All
Power Steering Pumps
- Department
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Traverse Reservoir
PartNumber: 25879975
Product Specifications- Other Names: Reservoir
- Item Dimensions: 6.8 x 6.6 x 13.9 inches
- Item Weight: 1.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Traverse Reservoir
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
$60.11 MSRP:$99.50You Save: $39.39 (40%)
Dorman® OE Solutions Power Steering Reservoir for 2010 Chevrolet Traverse
PartNumber: 603-854Product Specifications- Bracket: With
- Color: Black
- Material: Plastic
- Mounting Hardware: Without
- Reservoir Type: Single
- UPC: 889245632579
- Part Description: 2010 Chevrolet Traverse OE Solutions Power Steering Reservoir
Vehicle Fitment- 2010 Chevrolet Traverse | All Trims | All Engines
$49.38
FAQ for Power Steering Reservoir Repair
Q: How to install the power steering fluid reservoir?
A:
You shall install the remote power steering fluid reservoir, connect the power steering fluid reservoir outlet and inlet hoses and clamps, fill and bleed the power steering system, and install the fuel injector sight shield.
By Bob
GM Specialist
01/11/2022Q: How to remove the power steering fluid reservoir bracket?
A:
You shall remove the fuel injector sight shield, the right side engine mount strut bracket, and power steering fluid from the remote power steering fluid reservoir and the remote power steering fluid reservoir bracket, and transfer any parts as needed.
By Bob
GM Specialist
01/11/2022Q: How to remove the power steering fluid reservoir?
A:
You shall remove the fuel injector sight shield, and power steering fluid from the remote power steering fluid reservoir, disconnect the hose from the remote power steering fluid reservoir and remove the remote power steering fluid reservoir.
By Bob
GM Specialist
01/11/2022Q: How to bleed the power steering system?
A:
You shall fill the pump reservoir to the MAX mark on the Capstick fluid level indicator, raise the vehicle until the front wheels are off the ground, start the engine and turn the steering wheel from stop to stop 4 times, verify the power steering fluid level, rotate steering wheel from left to right another 8 times, and verify the fluid level.
By Bob
GM Specialist
01/11/2022Q: How to install the power steering fluid reservoir bracket?
A:
You shall install the remote power steering fluid reservoir bracket, the right-side engine mount strut bracket, and the fuel injector sight shield.
By Bob
GM Specialist
01/11/2022Q: How do I install the Power Steering Fluid Reservoir Bracket?
A:
Start with installing the remote power steering fluid reservoir bracket by tightening the bolts to 9 Nm (80 LB IN). Next, connect the inlet and outlet hose to the power steering fluid reservoir. Clean the excess fluid from the vehicle and remove the drain pans. Install the strut bracket, fill and bleed the power steering system. Lastly, install the fuel injector sight shield.
By Omar
GM Specialist
12/03/2022Q: How do I install the power steering fluid reservoir?
A:
Start with installing the remote power steering fluid reservoir by tightening the bolts to 9 Nm (80 LB IN). Connect the inlet and outlet hose and clamp. Clean any excess fluid from the vehicle and remove the drain pans, fill and bleed the system. Lastly, install the fuel injector sight shield.
By Bob
GM Specialist
12/03/2022Q: How do I remove the Power Steering Fluid Reservoir Bracket?
A:
Start with removing the fuel injector sight shield, the right side engine mount strut bracket, and as much power steering fluid as possible. Then place a drain pan under the vehicle. Disconnect the inlet and outlet power steering fluid reservoir outlet. Then remove the remote power steering fluid reservoir bracket. Transfer parts as needed.
By Omar
GM Specialist
11/03/2022Q: How do I remove the Power Steering Fluid Reservoir?
A:
First, start with removing the fuel injector sight shield and as much power steering fluid from the reservoir as possible. Place a drain pan under the vehicle and squeeze the power steering inlet and outlet hose clamp and disconnect the hose from the remote power steering fluid reservoir. Then remove the power steering fluid reservoir.
By Bob
GM Specialist
11/03/2022See more FAQs (4)