Part Description: 2010 Chevrolet Traverse Spare Carrier
More Info
Vehicle Fitment
2010 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
FAQ for Spare Tire Hoist Repair
Q: What is the recommended torque for spare tire hoist bolts?
A:
The recommended torque is 25 Nm (18 lb-ft).
By Bob
GM Specialist
02/11/2022
Q: What is the preliminary procedure for servicing the spare wheel hoist?
A:
The procedure is to remove the tire and wheel from the spare tire hoist and raise and support the vehicle.
By Bob
GM Specialist
02/11/2022
Q: How many bolts does the spare tire hoist attach?
A:
It attaches 2 bolts.
By Bob
GM Specialist
02/11/2022
Q: What is the spare wheel hoist service procedure?
A:
Remove the tire and wheel from the spare tire hoist. Next, raise and support the vehicle. Tighten the spare tire hoist bolts to 25 Nm.
By Omar
GM Specialist
04/03/2022
FAQ for Other Repair Info
Q: What is the preliminary procedure for servicing the liftgate hinge?
A:
The procedure is to remove the liftgate, drop the rear of the headliner to access the bolts, and use a grease pencil to mark the Liftgate Hinge position to the body prior to removal.
Q: What will need to be removed before servicing the Lift Gate Actuator?
A:
You will need to remove the body side trim panel and disconnect the power Liftgate Actuator rod.
Q: How to service the accessory and liftgate control module?
A:
You shall disconnect the electrical connectors, and reprogram the accessory and liftgate control module if replaced.