< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Traverse
< Back to View All
Wheel Hubs, Bearings & Seals
- Department
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Traverse Hub & Bearing
PartNumber: 22756832
Product Specifications- Notes: W/O AWD; W/AWD; Enclave, Traverse
- Location: Passenger Side; Driver Side
- Other Names: Front Hub & Bearing, Hub, Hub & Bearing
- Item Dimensions: 10.6 x 9.5 x 6.7 inches
- Item Weight: 12.80 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19434718
- Part Description: 2010 Chevrolet Traverse Hub & Bearing
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
$102.22 MSRP:$192.88You Save: $90.66 (48%)
FAG® Rear Driver Side Wheel Bearing and Hub Assembly for 2010 Chevrolet Traverse
PartNumber: 102226Product Specifications- Notes: FAG Global# 102226
- Hub Flange Mount Hole Quantity: 3
- Number of Bolt Holes: 3
- Number of Hub Bolts: 6
- UPC: 670774211256
- Part Description: 2010 Chevrolet Traverse Rear Driver Side Wheel Bearing and Hub Assembly
Vehicle Fitment- 2010 Chevrolet Traverse | All Trims | All Engines
$135.28
FAQ for Wheel Bearing Repair
Q: How to remove the front wheel bearing and hub?
A:
You shall remove the tire and wheel, the front brake rotor, and the wheel drive shaft retaining nut and washer, separate the wheel drive shaft from the wheel bearing and hub, and remove the wheel bearing and hub assembly.
By Bob
GM Specialist
01/11/2022Q: What should be noted when servicing the rear wheel bearing and hub (AWD)?
A:
The wheel bearing and hub assembly include a magnetic encoder with built-in permanent magnets that the wheel speed sensor senses. Any contact with another magnet will damage the encoder magnets.
By Bob
GM Specialist
01/11/2022Q: What kind of tools will be required in the replacement of the rear wheel bearing and hub (AWD)?
A:
The tools required include J 42129 Front/Rear Spindle Remover.
By Bob
GM Specialist
01/11/2022Q: How to install the front wheel bearing and hub?
A:
The proper way is to install the wheel bearing and hub assembly in the knuckle, the retaining bolts for the wheel bearing and hub, the front brake rotor, the wheel drive shaft retaining nut and washer, and the tire and wheel.
By Bob
GM Specialist
01/11/2022Q: What is the preliminary procedure for servicing the rear wheel bearing and hub (AWD)?
A:
The procedure is to raise and support the vehicle and remove the rear brake rotor.
By Bob
GM Specialist
01/11/2022Q: How many bolts attach to the wheel bearing hub?
A:
3 Bolts attach to the wheel bearing hub.
By Omar
GM Specialist
10/03/2022Q: What is the recommended bolt torque for the wheel bearing and hub bolts?
A:
The recommended bolt torque is 120 Nm (89 LB IN).
By Omar
GM Specialist
05/03/2022Q: What is the recommended bolt torque for the wheel bearing hub bolts?
A:
The recommended bolt torque is 130 Nm (96 LB-FT).
By Bob
GM Specialist
05/03/2022Q: What should be done before servicing the Rear Wheel Bearing and Hub?
A:
You will need to lift and support the vehicle as well as remove the rear brake rotor.
By Bob
GM Specialist
04/03/2022Q: What special tools will I be needing when servicing the Front Wheel Bearing and Hub?
A:
You will be needing a Wheel Hub Puller.
By Omar
GM Specialist
03/03/2022See more FAQs (7)