< Back ×
2010 Chevrolet Traverse Wheel Hub Bolt
My Vehicle Change Vehicle
2010 Chevrolet Traverse
< Back to View All
Wheel Hubs, Bearings & Seals
- Department
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Traverse Rotor Bolt
PartNumber: 11609271$6.43 MSRP:$12.13You Save: $5.70 (47%)Product Specifications- Notes: W/AWD;W/O AWD
- Location: Driver Side; Passenger Side
- Other Names: Rotor Bolt, Rotor Screw
- Item Dimensions: 1.3 x 1.1 x 0.7 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Traverse Rotor Bolt
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
Product Specifications- Material: Steel
- Package Contents: 3 Bolts
- UPC: 889245012166
- Part Description: 2010 Chevrolet Traverse OE Solutions Front Wheel Hub Bolt
Vehicle Fitment- 2010 Chevrolet Traverse | All Trims | All Engines
OEM (Genuine) 2010 Chevrolet Traverse Hub & Bearing Wheel Stud
PartNumber: 11588811$5.93 MSRP:$9.41You Save: $3.48 (37%)Product Specifications- Notes: W/O AWD; W/AWD
- Location: Driver Side; Passenger Side
- Other Names: Hub & Bearing Wheel Stud, Wheel Stud
- Item Dimensions: 3.1 x 3.1 x 2.8 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 92171058, 15027048
- Part Description: 2010 Chevrolet Traverse Hub & Bearing Wheel Stud
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
FAQ for Wheel Hub Bolt Repair
Q: How to remove the wheel stud?
A:
You shall raise and support the vehicle, remove the tire and wheel and the brake rotor, and press the wheel stud from the bearing/hub.
By Bob
GM Specialist
01/11/2022Q: How many wheel studs are needed?
A:
You need 2 wheel studs.
By Bob
GM Specialist
01/11/2022Q: How to install the wheel stud?
A:
You shall install a new wheel stud, 3 flat washers to the wheel stud, a hex nut to the wheel stud, the brake rotor, and the tire and wheel.
By Bob
GM Specialist
01/11/2022Q: What kind of tools will be required in the replacement of the wheel stud?
A:
The tool required includes J 43631 Ball Joint Remover.
By Bob
GM Specialist
01/11/2022Q: What is the preliminary procedure for servicing the wheel stud?
A:
You shall remove the rear wheel bearing/hub assembly.
By Bob
GM Specialist
01/11/2022Q: How do I install the Wheel Stud?
A:
Start with installing a new wheel stud from the back side of the bearing/hub. Install 3 flat washers and a hex nut to the wheel stud. Tighten the hex nut until the stud head is fully seated in the bearing/hub flange. Then remove the nut and washers from the wheel stud. Install the brake rotor, the tire and the wheel.
By Omar
GM Specialist
12/03/2022Q: How do I remove the Wheel Stud?
A:
Start with lifting and supporting the vehicle. Then remove the tire, wheel, and brake rotor. Use the ball joint remover to press the wheel stud from the bearing/hub.
By Omar
GM Specialist
11/03/2022Q: How many studs attach to the wheel?
A:
6studs attach the wheel.
By Omar
GM Specialist
09/03/2022Q: What special tools will I be needing when servicing the wheel stud?
A:
You will be needing a ball joint remover.
By Bob
GM Specialist
03/03/2022Q: What will need to be removed before servicing the Wheel Stud?
A:
You will need to remove the rear wheel bearing hub assembly.
By Bob
GM Specialist
02/03/2022See more FAQs (5)