< Back ×
My Vehicle Change Vehicle
2010 GMC Canyon
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2010 GMC Canyon AC Hoses
PartNumber: 23247230
Product Specifications- Notes: 2.8, 2.9, 3.5, 3.7 Liter, 2.8 & 2.9 Liter; Canyon, Colorado; Compressor & Condenser; 2.9L
- Other Names: AC Hose, Pressure Hose
- Item Dimensions: 28.8 x 7.2 x 7.0 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15191367
- Part Description: 2010 GMC Canyon AC Hoses
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS
$121.60 MSRP:$229.48You Save: $107.88 (48%)OEM (Genuine) 2010 GMC Canyon AC Hoses
PartNumber: 23247229
Product Specifications- Notes: 2.8, 2.9, 3.5, 3.7 Liter, 3.5 & 3.7 Liter; Canyon, Colorado; Compressor & Condenser; 3.7L
- Other Names: AC Hose, Pressure Hose
- Item Dimensions: 24.3 x 8.0 x 4.4 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22907761, 15191366
- Part Description: 2010 GMC Canyon AC Hoses
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
$92.22 MSRP:$174.02You Save: $81.80 (48%)
OEM (Genuine) 2010 GMC Canyon Rear AC Tube
PartNumber: 19257630
Product Specifications- Notes: 2.8, 2.9, 3.5, 3.7 Liter
- Other Names: Rear AC Tube
- Item Dimensions: 41.6 x 28.2 x 17.0 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19130037
- Part Description: 2010 GMC Canyon Rear AC Tube
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS
$70.86 MSRP:$128.87You Save: $58.01 (46%)
OEM (Genuine) 2010 GMC Canyon AC Hose
PartNumber: 22756852
Product Specifications- Notes: 5.3 Liter, Evaporator
- Other Names: AC Hose
- Item Dimensions: 40.5 x 36.0 x 11.3 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25779155, 25992447
- Part Description: 2010 GMC Canyon AC Hose
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT | 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Rear AC Hose
PartNumber: 20816380
Product Specifications- Notes: 5.3 Liter, Compressor
- Other Names: AC Hose, Rear AC Hose
- Item Dimensions: 30.3 x 17.5 x 6.5 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25813637
- Part Description: 2010 GMC Canyon Rear AC Hose
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT | 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Hose Asm-A/C Condenser
PartNumber: 15865705
Product Specifications- Notes: 5.3 Liter, Condensor; Canyon, Colorado; Compressor & Condenser; 5.3L
- Other Names: AC Hose, Front AC Hose
- Item Dimensions: 32.3 x 18.9 x 13.0 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Hose Asm-A/C Condenser
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT | 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Hose Asm-A/C Evaporator
PartNumber: 25904918
Product Specifications- Notes: 2.8, 2.9, 3.5, 3.7 Liter; Canyon, Colorado; Evaporator & Accumulator
- Other Names: AC Hose, Hose & Tube Assembly
- Item Dimensions: 25.6 x 16.3 x 8.1 inches
- Item Weight: 2.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 21995791, 15812614, 15116979
- Part Description: 2010 GMC Canyon Hose Asm-A/C Evaporator
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for A/C Hose Repair
Q: How to select and install the correct mandrel on the threaded portion of the installation tool bolt?
A:
You need to bear in mind that the brass Universal Mandrel is for use on hose fittings with a smooth bore where the screen installs flush with the end of the fitting, and the 11.96 mm (0.471 in) Mandrel is only for the 11.96 mm (0.471 in) screen in hose fittings with an internal hourglass shape where the screen installs at the recessed, reduced diameter point.
By Bob
GM Specialist
28/10/2022Q: Which tool is required during the Air Conditioning Evaporator Tube replacement?
A:
You need to prepare the J 39400-A Halogen Leak Detector.
By Bob
GM Specialist
28/10/2022Q: How to install the Suction Hose?
A:
You need to install the suction hose to the vehicle and install new sealing washers. Then you need to install the suction hose to the TXV and install the nut to the TXV stud, and you need to install the suction hose to the compressor and install the suction hose mounting bolt to the A/C compressor. After that, you need to install the generator, and evacuate and recharge the A/C system. Finally, you need to leak-test the fittings of the component.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the discharge hose mounting bolt?
A:
The recommended torque is 16 Nm (12 lb-ft).
By Bob
GM Specialist
28/10/2022Q: How to remove the Air Conditioning Evaporator Tube?
A:
You need to recover the refrigerant from the system, remove the evaporator tube nut from the TXV stud, and remove the evaporator tube from the TXV. Then you need to remove the evaporator tube from the retaining clips on the fender, and you need to remove the grille and remove the evaporator tube retaining clip from the condenser. After that, you need to remove the evaporator tube attaching bolt to the receiver dehydrator and remove the evaporator tube. Finally, you need to remove and discard the O-ring seal.
By Bob
GM Specialist
28/10/2022Q: How to remove the Discharge Hose?
A:
You need to recover the refrigerant and remove the generator, and you need to remove the discharge hose mounting bolt and the discharge hose from the A/C compressor. Then you need to remove the discharge hose bolt and the discharge hose from the condenser and remove the discharge hose from the vehicle. Finally, you need to discard all of the used sealing washers and cap the system openings.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the bolt to the receiver dehydrator?
A:
The recommended torque is 28 Nm (21 lb-ft).
By Bob
GM Specialist
28/10/2022Q: Which special tool is required during the Discharge Hose replacement?
A:
You need to prepare a J 39400-A Halogen Leak Detector.
By Bob
GM Specialist
28/10/2022Q: Which tool is required during the Suction Screen replacement?
A:
You need to prepare a J 44551 Suction Screen Kit.
By Bob
GM Specialist
28/10/2022Q: How to remove the Suction Hose?
A:
You need to recover the refrigerant and remove the generator, and you need to remove the suction hose mounting bolt and the suction hose from the A/C compressor. Then you need to remove the nut from the TXV stud, the suction hose from the TXV, and remove the suction hose assembly from the vehicle. Finally, you need to discard all of the used sealing washers and cap the system openings.
By Bob
GM Specialist
28/10/2022See more FAQs (11)