< Back ×
My Vehicle Change Vehicle
2010 GMC Canyon
< Back to View All
ABS & Parking Brake
- Department
- Prices
OEM (Genuine) 2010 GMC Canyon Front Speed Sensor
PartNumber: 84070321
Product Specifications- Notes: Canyon, Colorado; 5.3L; W/O Z71-Off Road Pkg, Z85-Chassis Pkg, 5.3 Liter; 4WD; W/Z71-Off Road Pkg
- Location: Driver Side; Passenger Side
- Other Names: ABS Sensor, Front Speed Sensor
- Item Dimensions: 9.1 x 5.2 x 4.2 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22884494, 25832173
- Part Description: 2010 GMC Canyon Front Speed Sensor
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$36.30 MSRP:$72.04You Save: $35.74 (50%)
OEM (Genuine) 2010 GMC Canyon Vehicle Speed Sensor
PartNumber: 24225896
Product Specifications- Notes: Canyon, Colorado; 2WD; Auto Trans
- Other Names: Speed Sensor, Vehicle Speed Sensor
- Item Dimensions: 4.7 x 2.9 x 2.9 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10456194, 10456520
- Part Description: 2010 GMC Canyon Vehicle Speed Sensor
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$23.80 MSRP:$39.40You Save: $15.60 (40%)OEM (Genuine) 2010 GMC Canyon Front Speed Sensor
PartNumber: 84070322
Product Specifications- Notes: Canyon, Colorado; 2.9L, 3.7L; W/O Z71-Off Road Pkg, Z85-Chassis Pkg, 2.9 & 3.7 Liter;W/O Z71-Off Road Pkg, Zq8-Sport Pkg
- Location: Driver Side; Passenger Side
- Other Names: Front Speed Sensor
- Item Dimensions: 9.4 x 5.2 x 4.0 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20819481, 25832172, 22884493
- Part Description: 2010 GMC Canyon Front Speed Sensor
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$38.50 MSRP:$70.02You Save: $31.52 (46%)
FAQ for ABS Wheel Speed Sensor Repair
Q: What is the recommended torque for the wheel speed sensor harness bracket bolt?
A:
The recommended torque is 9 Nm (80 lb in).
By Bob
GM Specialist
28/10/2022Q: How to install the Front Wheel Speed Sensor?
A:
You need to install the wheel speed sensor to the suspension knuckle and the wheel speed sensor bolt and install the wheel speed sensor harness bracket bolt. Then you need to install the wheel speed sensor harness grommet and the wheel speed sensor harness clips. After that, you need to install the wheel speed sensor harness connector to the wheelhouse and connect the wheel speed sensor electrical connector. Finally, you need to install the tire and wheel assembly and perform the Diagnostic System Check.
By Bob
GM Specialist
28/10/2022Q: How to remove the Front Wheel Speed Sensor?
A:
You need to disconnect the wheel speed sensor electrical connector, release the wheel speed sensor harness, raise and support the vehicle, and remove the tire and wheel assembly. Then you need to release the wheel speed sensor harness clips and release the wheel speed sensor harness grommet and remove the wheel speed sensor harness grommet. After that, you need to clean the wheel speed sensor mounting area of the steering knuckle of any dirt and debris and remove the wheel speed sensor bolt. Finally, you need to carefully remove the wheel speed sensor from the suspension knuckle.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the wheel speed sensor bolts?
A:
The recommended torque is 17 Nm (13 lb-ft).
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the wheel speed sensor bolt?
A:
The recommended torque is 8 Nm (71 lb in).
By Bob
GM Specialist
28/10/2022Q: How to install the Rear Wheel Speed Sensor?
A:
You need to position the wheel speed sensor assembly to the vehicle, connect the wheel speed sensor electrical connector, and install the electrical connector and harness retainer. Then you need to position the wheel speed sensor harness to the retainers on the rear park brake cable, fasten the wheel speed sensor harness retainers, and you need to install the wheel speed sensor to the drum brake backing plate. After that, you need to install the wheel speed sensor bolts. Finally, you need to lower the vehicle and perform the Diagnostic System Check.
By Bob
GM Specialist
28/10/2022Q: How to remove the Rear Wheel Speed Sensor?
A:
You need to remove the wheel speed sensor bolts and remove the wheel speed sensor. Then you need to release the wheel speed sensor harness retainers and release the harness from the retainers. After that, you need to disconnect the wheel speed sensor electrical connector and release the electrical connector and harness retainer. Finally, you need to remove the wheel speed sensor assembly.
By Bob
GM Specialist
28/10/2022See more FAQs (2)