< Back ×
2010 GMC Canyon Blower Motor
My Vehicle Change Vehicle
2010 GMC Canyon
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
$48.97Product Specifications- Notes: w/Wheel; Original blower motor cover will not be used w/replacement motor
- Cage Wheel Included: w/ Wheel
- Connector Gender: Female
- Connector qty: 1
- Flanged End: Yes
- Material: Plastic
- Motor Diameter: 3.250
- Mount Type: OE Mount
- New or Reman: New
- Number of Terminals: 2
- O.E. Replacement: Yes
- Printed Foot Note: Original blower motor cover will not be used with replacement motor
- Rotation: CW
- Shaft Diameter: 0.3125
- Shaft Length: 1.375
- Style: Flanged
- Terminal Type: 2 Lead Wires w/ Connector
- UPC: 096361757448
- Vented: Vented
- Voltage: 12
- Wheel Dia. IN: 5.750
- Wheel Height IN: 3.000
- Part Description: 2010 GMC Canyon Hvac Blower Motor With Wheel
Vehicle Fitment- 2010 GMC Canyon | All Trims | All Engines
$138.20 MSRP:$260.78You Save: $122.58 (48%)Product Specifications- Other Names: Blower Motor, Fan & Motor
- Item Dimensions: 10.6 x 9.6 x 8.5 inches
- Item Weight: 4.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 89018843, 89019052, 89018663, 89018412
- Part Description: 2010 GMC Canyon Fan & Motor
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Blower Motor Repair
Q: How to remove the Blower Motor?
A:
You need to remove the right hinge pillar trim panel. Then you need to remove the blower motor mounting screws and the blower motor cooling tube. After that, you need to disconnect the blower motor electrical connector. Finally, you can remove the Blower Motor.
By Bob
GM Specialist
01/11/2022Q: How to install the Blower Motor?
A:
You need to install the blower motor and connect the blower motor electrical connector. Then you need to install the blower motor cooling tube. After that, you need to install the blower motor mounting screws. Finally, you need to install the right hinge pillar trim panel.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the blower motor mounting screws?
A:
The recommended torque is 2 Nm (18 lb in).
By Bob
GM Specialist
01/11/2022