< Back ×
2010 GMC Canyon Camber and Alignment Kit
My Vehicle Change Vehicle
2010 GMC Canyon
< Back to View All
Alignment Kits
- Department
- Prices
Product Specifications- Notes: 4WD
- Location: Driver Side; Passenger Side
- Item Dimensions: 1.6 x 1.5 x 0.7 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 11518997, 11588927, 11508101
- Part Description: 2010 GMC Canyon Motor Nut
Vehicle Fitment- 2010 GMC Canyon | All Terrain, AT4, AT4X, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.5 L GAS, 4 Cyl 2.7 L GAS, 4 Cyl 2.8 L DIESEL, 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Adjust Bolt
PartNumber: 11588462$25.13 MSRP:$39.92You Save: $14.79 (38%)Product Specifications- Notes: W/O Z71-Off Road Pkg; 4WD; W/Z71-Off Road Pkg
- Location: Passenger Side
- Item Dimensions: 5.3 x 3.1 x 2.4 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Adjust Bolt
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Adjust Bolt
PartNumber: 11588463$18.89 MSRP:$31.24You Save: $12.35 (40%)Product Specifications- Notes: W/O Z71-Off Road Pkg; 4WD; W/Z71-Off Road Pkg
- Location: Driver Side
- Item Dimensions: 5.2 x 3.3 x 2.5 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Adjust Bolt
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Mount Brace Bolt
PartNumber: 11588743$5.09 MSRP:$8.08You Save: $2.99 (38%)Product Specifications- Notes: W/AC, 2.9 & 3.7 Liter
- Item Dimensions: 3.2 x 1.5 x 1.0 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Mount Brace Bolt
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS
Product Specifications- Notes: W/O Z71-Off Road Pkg, Front; W/O Z71-Off Road Pkg, Rear; 4WD, Front; 4WD, Rear; W/Z71-Off Road Pkg, Front; W/Z71-Off Road Pkg, Rear
- Location: Driver Side; Passenger Side
- Other Names: Adjust Cam, Alignment Cam, Upper Control Arm Cam
- Item Dimensions: 3.7 x 2.9 x 0.6 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Cam, Front Lower Control Arm Adjust
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Product Specifications- Notes: W/O Z71-Off Road Pkg, Rear; W/O Z71-Off Road Pkg, Front; 4WD, Front; 4WD, Rear; W/Z71-Off Road Pkg, Front; W/Z71-Off Road Pkg, Rear
- Location: Driver Side; Passenger Side
- Other Names: Adjust Cam, Alignment Cam, Upper Control Arm Cam
- Item Dimensions: 3.4 x 2.4 x 0.5 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Cam, Front Lower Control Arm Adjust
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Camber and Alignment Kit Repair
Q: What is the recommended torque for the 4WD cam nuts?
A:
The recommended torque is 155 Nm (114 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What should I do before adjusting the caster and camber angles?
A:
You are recommended to jounce the front bumper three times to allow the vehicle to return to normal height.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the 2WD cam nuts?
A:
The recommended torque is 155 Nm (114 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the jam nut on the tie rod?
A:
The recommended torque is 70 Nm (52 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to adjust the Steering Wheel Angle and/or Front Toe?
A:
You need to loosen the jam nut on the tie rod and rotate the inner tie rod to the required toe specification setting. Then you need to tighten the jam nut on the tie rod. After that, you need to check the toe setting after tightening. Finally, you can readjust the toe setting if necessary.
By Bob
GM Specialist
01/11/2022Q: Which special tool is required during the Front Caster and Camber adjustment?
A:
You need to prepare a J 45938 Alignment Socket.
By Bob
GM Specialist
01/11/2022See more FAQs (1)