< Back ×
My Vehicle Change Vehicle
2010 GMC Canyon
< Back to View All
Timing Belts, Chains, Cams & Related Parts
- Department
- Prices
OEM (Genuine) 2010 GMC Canyon AC Belt
PartNumber: 12626222
Product Specifications- Notes: 5.3 Liter; Canyon, Colorado; W/Ac; 5.3L
- Other Names: Drive Belt, Serpentine Belt
- Item Dimensions: 6.2 x 3.4 x 0.9 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12590622
- Part Description: 2010 GMC Canyon AC Belt
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT | 8 Cyl 5.3 L GAS
$36.63 MSRP:$66.32You Save: $29.69 (45%)
OEM (Genuine) 2010 GMC Canyon AC Belt
PartNumber: 19210691
Product Specifications- Notes: 5.3 Liter; Canyon, Colorado; 5.3L
- Other Names: AC Belt
- Item Dimensions: 16.8 x 9.8 x 3.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19178068, 12603509
- Part Description: 2010 GMC Canyon AC Belt
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT | 8 Cyl 5.3 L GAS
$46.02 MSRP:$81.30You Save: $35.28 (44%)
OEM (Genuine) 2010 GMC Canyon Serpentine Belt
PartNumber: 12611636
Product Specifications- Notes: W/Ac, 2.9 & 3.7 Liter; Canyon, Colorado; W/Ac; 2.9L, 3.7L
- Other Names: Serpentine Belt
- Item Dimensions: 18.2 x 4.2 x 0.9 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12580826, 12593776
- Part Description: 2010 GMC Canyon Serpentine Belt
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS
$38.91 MSRP:$70.43You Save: $31.52 (45%)
FAQ for Drive Belt Repair
Q: How to install the Drive Belt?
A:
You need to route the drive belt over all the pulleys, and you need to install the 3/8 inch breaker bar on the drive belt tensioner and rotate the tensioner clockwise. Then you need to route the drive belt over the top of the water pump pulley. After that, you need to slowly release the tension to the drive belt tensioner. Finally, you need to inspect for proper installation of the drive belt on the pulleys.
By Bob
GM Specialist
29/10/2022Q: How to remove the Drive Belt?
A:
You need to install a 3/8-inch breaker bar into the drive belt tensioner and rotate the tensioner clockwise, enough to relieve the tension on the drive belt. Then you need to slide the drive belt from the water pump pully. After that, you need to allow the drive belt tensioner to return to the relaxed position. Finally, you can remove the drive belt from the remaining pulleys.
By Bob
GM Specialist
29/10/2022Q: What do I need to caution before servicing the Belt Dressing?
A:
You are recommended not to use belt dressing on the drive belt because belt dressing causes the breakdown of the composition of the drive belt.
By Bob
GM Specialist
29/10/2022