< Back ×
My Vehicle Change Vehicle
2010 GMC Canyon
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
OEM (Genuine) 2010 GMC Canyon Drive Shaft
PartNumber: 25843685
Product Specifications- Notes: Canyon, Colorado
- Other Names: Drive Shaft
- Item Dimensions: 35.4 x 7.3 x 6.2 inches
- Item Weight: 15.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15104642
- Part Description: 2010 GMC Canyon Drive Shaft
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$556.49 MSRP:$921.07You Save: $364.58 (40%)
Dorman® OE Solutions Front Driveshaft for 2010 GMC Canyon
PartNumber: 936-113Product Specifications- Drive Shaft Diameter (In): 2"
- Drive Shaft Wall Thickness (In): 0.065"
- Greaseable Drive Shaft: Yes
- Length: 28.5"
- Material: Steel
- OE Part Number: 15104642
- Outside Diameter: 2"
- Overall Length Adjustable: No
- Product Condition: New
- Transmission Type: Automatic
- UPC: 037495121682
- Wall Thickness: 0.065"
- Part Description: 2010 GMC Canyon OE Solutions Front Driveshaft
Vehicle Fitment- 2010 GMC Canyon | All Trims | All Engines
$270.25
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2010 GMC Canyon
PartNumber: 65-9516Product Specifications- Notes: with 27-5/8" (701 mm) Long Driveshaft;Square flange on CV;Measurement is taken from the CV face to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft; Supplied as new
- Greasable: Yes
- Length: 27.625"
- Length (mm): 701
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2010 GMC Canyon Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2010 GMC Canyon | All Trims | All Engines
$282.62
OEM (Genuine) 2010 GMC Canyon Axle Assembly
PartNumber: 20777019
Product Specifications- Notes: W/Locking Diff, 3.73 Ratio
- Item Dimensions: 68.5 x 18.8 x 13.9 inches
- Item Weight: 82.70 Pounds
- Replaces: 25976727
- Part Description: 2010 GMC Canyon Axle Assembly
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$1891.47 MSRP:$2445.37You Save: $553.90 (23%)
Dorman® OE Solutions Rear Driveshaft for 2010 GMC Canyon
PartNumber: 936-291Product Specifications- Drive Shaft Diameter (In): 3.5 In.
- Drive Shaft Wall Thickness (In): 0.083 In.
- Greaseable Drive Shaft: No
- Length: 60"
- Material: Steel
- OE Part Number: 15173138, 15828017, 15286715, 15126587
- Outside Diameter: 3.5"
- Overall Length Adjustable: No
- Transmission Type: Automatic/Manual
- UPC: 037495123501
- Wall Thickness: 0.083"
- Part Description: 2010 GMC Canyon OE Solutions Rear Driveshaft
Vehicle Fitment- 2010 GMC Canyon | All Trims | All Engines
$280.40OEM (Genuine) 2010 GMC Canyon Propeller Shaft Assembly
PartNumber: 22811801
Product Specifications- Notes: Canyon, Colorado; 2WD; Extended & Crew Cab; 1 Piece Drive Shaft;Canyon, Colorado; 2WD; Standard Cab; 125.9 Wheelbase; 1 Piece Drive Shaft; Canyon, Colorado; 2WD; Extended & Crew Cab; 1 Piece Drive Shaft; Off Road;Canyon, Colorado; 2WD; Standard Cab; 125.9 Wheelbase; 1 Piece Drive Shaft; Off Road
- Other Names: Drive Shaft
- Item Dimensions: 77.9 x 4.2 x 4.1 inches
- Item Weight: 14.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25787945
- Part Description: 2010 GMC Canyon Propeller Shaft Assembly
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Propeller Shaft Assembly
PartNumber: 15286715
Product Specifications- Notes: One Piece; Canyon, Colorado; 2WD; Standard Cab; 111.2 Wheelbase; W/O 5.3L
- Other Names: Drive Shaft, Drive Shaft Assembly
- Item Dimensions: 64.0 x 4.0 x 4.1 inches
- Item Weight: 18.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Propeller Shaft Assembly
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Axle Assembly
PartNumber: 88964475
Product Specifications- Notes: 4WD; Canyon, Colorado
- Location: Driver Side; Passenger Side
- Other Names: Axle Assembly
- Item Dimensions: 6.1 x 6.2 x 29.4 inches
- Item Weight: 16.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Axle Assembly
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Rear Axle Shaft Assembly (Rh)
PartNumber: 19208247
Product Specifications- Notes: Canyon, Colorado; 2WD; W/Off Road Pkg.; Right;Canyon, Colorado; 4WD; Left;Canyon, Colorado; 4WD; Right; Canyon, Colorado; 2WD; W/Off Road Pkg.; Right;Canyon, Colorado; 4WD; Right
- Other Names: Axle Shaft
- Item Dimensions: 48.3 x 11.6 x 13.4 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Rear Axle Shaft Assembly (Rh)
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Front Axle Assembly (3.73 Ratio)
PartNumber: 20849983
Product Specifications- Notes: 4WD, 3.73 Ratio; Canyon, Colorado; 3.73 Ratio
- Other Names: Axle Assembly, Differential Assembly
- Fitment Type: Direct Replacement
- Replaces: 15876777
- Part Description: 2010 GMC Canyon Front Axle Assembly (3.73 Ratio)
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Axle Asm-Rear (3.73 Ratio)
PartNumber: 25976726Product Specifications- Notes: W/O Locking Diff, 3.73 Ratio
- Other Names: Axle Assembly
- Item Dimensions: 64.8 x 19.0 x 13.5 inches
- Item Weight: 78.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Axle Asm-Rear (3.73 Ratio)
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Propeller Shaft Assembly
PartNumber: 25787947
Product Specifications- Notes: Canyon, Colorado; 4WD; W/O 5.3L
- Other Names: Drive Shaft
- Item Dimensions: 65.9 x 4.1 x 4.2 inches
- Item Weight: 15.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15116624
- Part Description: 2010 GMC Canyon Propeller Shaft Assembly
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
OEM (Genuine) 2010 GMC Canyon Rear Axle Shaft Assembly (Rh)
PartNumber: 19207452
Product Specifications- Notes: 2WD, W/Z71-Off Road Pkg;4WD
- Location: Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 37.7 x 10.5 x 11.0 inches
- Item Weight: 22.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Rear Axle Shaft Assembly (Rh)
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Front & Rear Propeller Shaft Assembly
PartNumber: 25787948
Product Specifications- Notes: Two Piece; Canyon, Colorado; 2WD; Extended & Crew Cab; 2 Piece Drive Shaft; 2ND Design;Canyon, Colorado; 2WD; Standard Cab; 125.9 Wheelbase; 2 Piece Drive Shaft; Canyon, Colorado; 2WD; Extended & Crew Cab; 2 Piece Drive Shaft; 2ND Design; Chassis Pkg.;Canyon, Colorado; 2WD; Standard Cab; 125.9 Wheelbase; 2 Piece Drive Shaft; Chassis Pkg.
- Other Names: Drive Shaft, Drive Shaft Assembly
- Item Dimensions: 92.0 x 6.9 x 8.8 inches
- Item Weight: 55.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15236807
- Part Description: 2010 GMC Canyon Front & Rear Propeller Shaft Assembly
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Shaft Asm-Propeller
PartNumber: 25792320Product Specifications- Notes: Canyon, Colorado; 4WD; W/5.3L
- Other Names: Drive Shaft
- Item Dimensions: 64.7 x 4.1 x 4.1 inches
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Shaft Asm-Propeller
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT | 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Front & Rear Propeller Shaft Assembly
PartNumber: 25999660Product Specifications- Notes: Canyon, Colorado; 2WD; Standard Cab; 111.2 Wheelbase; W/5.3L; W/Sport Chassis
- Other Names: Drive Shaft
- Item Dimensions: 90.2 x 6.6 x 8.6 inches
- Item Weight: 34.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Front & Rear Propeller Shaft Assembly
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT | 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Shaft Asm-Propeller
PartNumber: 22811802Product Specifications- Notes: Canyon, Colorado; 2WD; Standard Cab; 111.2 Wheelbase; W/5.3L; W/O Sport Chassis
- Item Dimensions: 88.5 x 6.8 x 8.8 inches
- Item Weight: 16.10 Pounds
- Replaces: 25792319
- Part Description: 2010 GMC Canyon Shaft Asm-Propeller
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT | 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Shaft Asm, Rear Axle (LH)
PartNumber: 19208245Product Specifications- Notes: Canyon, Colorado; 2WD; W/Off Road Pkg.; Left; Canyon, Colorado; 2WD; W/Off Road Pkg.; Left;Canyon, Colorado; 4WD; Left
- Other Names: Axle Shaft
- Item Dimensions: 47.4 x 11.3 x 13.4 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Shaft Asm, Rear Axle (LH)
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Shaft Asm, Rear Axle (RH)
PartNumber: 19207447Product Specifications- Notes: 2WD, W/O Z71-Off Road Pk; Canyon, Colorado; 2WD; W/O Off Road Pkg.; Right
- Location: Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 44.5 x 11.0 x 9.2 inches
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Shaft Asm, Rear Axle (RH)
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Rear Axle Shaft Assembly (Lh)
PartNumber: 19207449Product Specifications- Notes: 2WD, W/O Z71-Off Road Pk; Canyon, Colorado; 2WD; W/O Off Road Pkg.; Left
- Location: Driver Side
- Other Names: Axle Shaft
- Item Dimensions: 43.3 x 10.3 x 9.3 inches
- Item Weight: 22.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Rear Axle Shaft Assembly (Lh)
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Shaft Asm, Rear Axle (LH)
PartNumber: 19207454Product Specifications- Notes: 2WD, W/Z71-Off Road Pkg;4WD
- Location: Driver Side
- Other Names: Axle Shaft
- Item Dimensions: 44.5 x 10.5 x 9.0 inches
- Item Weight: 24.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Shaft Asm, Rear Axle (LH)
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Front Wheel Drive Intermediate Shaft Assembly
PartNumber: 19210911
Product Specifications- Notes: 4WD; Canyon, Colorado
- Other Names: Axle Shaft, Shaft
- Item Dimensions: 19.1 x 4.9 x 4.9 inches
- Item Weight: 6.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12479300
- Part Description: 2010 GMC Canyon Front Wheel Drive Intermediate Shaft Assembly
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Rear Axle Assembly (3.42 Ratio)
PartNumber: 25976721Product Specifications- Notes: W/O Locking Diff, 3.42 Ratio
- Other Names: Axle Assembly
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Rear Axle Assembly (3.42 Ratio)
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Rear Axle Assembly (3.42 Ratio)
PartNumber: 25976722Product Specifications- Notes: W/Locking Diff, 3.42 Ratio
- Other Names: Axle Assembly
- Item Dimensions: 65.4 x 20.1 x 14.0 inches
- Item Weight: 77.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Rear Axle Assembly (3.42 Ratio)
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Driveshaft Repair
Q: How to remove the Front Propeller Shaft?
A:
You need to raise and support the vehicle, mark the front U-joint to the pinion yoke on the front differential, and mark the relationship of the rear U-joint to the transfer case drive flange. Then you need to remove the retaining nuts and bolts from the drive flange, and remove the clamps and retaining bolts from the front drive axle pinion flange. After that, you need to remove the front propeller shaft from the vehicle. Finally, you need to wrap the front U-joint bearing caps to ensure the caps do not separate from the U-joint.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the clamps and retaining bolts?
A:
The recommended torque is 20 Nm (15 lb-ft).
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the lamps and retaining bolts?
A:
The recommended torque is 30 Nm (22 lb-ft).
By Bob
GM Specialist
29/10/2022Q: How to install the One-Piece Propeller Shaft?
A:
You need to remove the tape or rubber band from the U-Joint, install the propeller shaft in the transmission/transfer case, and align the propeller shaft with the reference marks on the pinion flange. Finally, you need to install the clamps and retaining bolts.
By Bob
GM Specialist
29/10/2022Q: How to install the Two-Piece Propeller Shaft?
A:
You need to align the reference marks on the propeller shaft to the transmission and install the propeller shaft in the transmission, the center bearing to the crossmember, and the center bearing mounting bolts. Then you need to rotate the propeller shaft, and remove the tape and/or rubber band. After that, you need to position the U-Joint in the pinion yoke, and install the clamps and retaining bolts. Finally, you need to ensure the alignment mark are aligned properly.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the bolts for the front propeller U-joint clamps?
A:
The recommended torque is 20 Nm (15 lb-ft).
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the bolts from the propeller shaft to the pinion flange?
A:
The recommended torque is 20 Nm (15 lb-ft).
By Bob
GM Specialist
29/10/2022Q: How to remove the One-Piece Propeller Shaft?
A:
You need to place the transmission in neutral and release the park brake if applied, and you need to raise and support the vehicle. Then you need to mark the rear universal joint to the drive shaft flange, remove the retaining bolts and clamps, and remove the propeller shaft from the pinion drive flange. After that, you need to remove the propeller shaft from the transmission/transfer case. Finally, you need to wrap the U-Joint bearing caps.
By Bob
GM Specialist
29/10/2022Q: How to remove the Two-Piece Propeller Shaft?
A:
You need to place the transmission in neutral, release the park brake, and raise and support the vehicle. Then you need to rotate the propeller shafts and mark the rear propeller shaft to the pinion drive flange, center bearing support, and transmission. After that, you need to remove the clamps and retaining bolts for the rear propeller shaft at the pinion drive flange and the center bearing, and you need to wrap the rear U-Joint bearing caps to ensure that they do not separate from the U-Joint. You also need to remove the rear propeller shaft from the center bearing, the mounting bolts for the center bearing, and the center bearing from the crossmember. Finally, you can remove the propeller shaft from the transmission.
By Bob
GM Specialist
29/10/2022Q: How to install the Front Propeller Shaft?
A:
You need to remove the tape or rubber band from the front U-joint, install the front propeller shaft, and align the reference marks on the front U-joint. Then you need to install the front U-joint bolts and clamps and align the reference marks on the rear U-joint. After that, you need to install the propeller shaft to pinion flange bolts. Finally, you need to lower the vehicle.\.
By Bob
GM Specialist
29/10/2022See more FAQs (6)