2010 GMC Canyon Fender Splash Shield

You need to install the hoist and the bolt. Then you need to install the Spare Tire Hoist shaft guide and install the mounting bolt for the guide. After that, you need to install the spare tire to the hoist and turn the hoist shaft clockwise until the spare tire is in position and the hoist clicks 2 times or it skips twice. Finally, you need to lower the vehicle.

You need to remove the rear side access door trim panel and remove the bolt retaining the rear side access Door Check link to the body. Then you need to remove the nuts retaining the rear side access door check link to the door. Finally, you need to remove the rear side access door check link from the door.

You need to position the body side rear Door Hinge to the alignment marks, install the bolts retaining the body side door hinge to the body, and lower the rear door down onto the body side hinge straps. Then you need to install the bolts retaining the rear door hinge keeper straps, connect the rear door wiring harness connectors, and install the rear door wiring harness grommet to the body. After that, you need to install the bolt retaining the rear door check link to the body. Finally, you need to inspect the door for proper operation and alignment.