Search Bar
Search by Part Number, Part Name, or Vehicle
  • My Garage
  • Cart
  • OE Parts
  • Body & Mirrors
  • Chassis & Brakes
  • Engine & Drivetrain
  • Electrical & Lighting
Help Center
< Back ×
  • Shop OE Parts
  • Shop By Category
  • Body & Mirrors
  • Chassis & Brakes
  • Engine & Drivetrain
  • Electrical & Lighting

2010 GMC Canyon Fuel Sending Unit

My Vehicle Change Vehicle
2010 GMC Canyon
Change Vehicle
Vehicle Options
We need more information about your vehicle to make a correct determination of fitment
< Back to View All
Fuel Systems
  • Department
  • Prices

2 Products found

5 Q&A for Fuel Sending Unit Repair
Sort by:
Recommended
Filter Results
Sort
View by
  • OEM 2010 GMC Canyon Fuel Pump - 19370386
    OEM 2010 GMC Canyon Fuel Pump Diagram - 19370386
    View Related Parts

    OEM (Genuine) 2010 GMC Canyon Fuel Pump

    PartNumber: 19370386
    $456.46 MSRP: $861.26
    You Save: $404.80 (48%)
    Product Specifications
    • Notes: Canyon, Colorado
    • Other Names: Fuel Pump, Fuel Sender Unit
    • Item Dimensions: 9.4 x 9.2 x 15.8 inches
    • Item Weight: 4.30 Pounds
    • Fitment Type: Direct Replacement
    • Replaces: 19207813, 19258175
    • Part Description: 2010 GMC Canyon Fuel Pump
    More Info
    Vehicle Fitment
    • 2010 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
  • OEM 2010 GMC Canyon Fuel Gauge Sending Unit - 19207814
    OEM 2010 GMC Canyon Fuel Gauge Sending Unit Diagram - 19207814
    View Related Parts

    OEM (Genuine) 2010 GMC Canyon Fuel Gauge Sending Unit

    PartNumber: 19207814
    $91.18 MSRP: $172.06
    You Save: $80.88 (48%)
    Product Specifications
    • Notes: Canyon, Colorado
    • Other Names: Fuel Gauge Sending Unit, Level Sensor
    • Item Dimensions: 5.2 x 3.1 x 10.1 inches
    • Item Weight: 0.50 Pounds
    • Fitment Type: Direct Replacement
    • Part Description: 2010 GMC Canyon Fuel Gauge Sending Unit
    More Info
    Vehicle Fitment
    • 2010 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

FAQ for Fuel Sending Unit Repair

Q: How to avoid fire risk and personal injury when replacing the Fuel Tank Module?
A:
You are recommended to always replace the fuel sender gasket when reinstalling the fuel sender assembly.
By Bob
GM Specialist
01/11/2022
Q: What kind of special tool is required during the Fuel Tank Module?
A:
You need to prepare a J 45722 Fuel Sender Lock Ring Tool.
By Bob
GM Specialist
01/11/2022
Q: How to reduce the risk of fire and personal injury when servicing the Fuel Tank Module?
A:
You are recommended to drain the fuel from the fuel sender assembly into an approved container, and never store the fuel in an open container.
By Bob
GM Specialist
01/11/2022
Q: What should I need to ensure when I rotate the lock ring?
A:
You need to ensure that the lock ring is installed with the correct side facing upward.
By Bob
GM Specialist
01/11/2022
Q: Which tool is required during the Fuel Tank Module replacement?
A:
You need to prepare a J 45722 Fuel Sender Lock Ring Tool.
By Bob
GM Specialist
01/11/2022

FAQ for Other Repair Info

Q: How to install the Fuel Injector?
A:
You need to lightly lubricate the new Fuel Injector O-ring seals with mineral oil GM P/N 9981704, and install the new fuel injector O-ring seals onto the fuel injector. Then you need to install a new retainer clip to the fuel injector and push the fuel injector into the rail socket with the electrical connector end facing outward. After that, you need to connect the fuel injector harness electrical connector to the fuel injector. Finally, you need to install the fuel rail assembly.
Q: How to remove the Fuel Level Sensor?
A:
You need to remove the fuel tank module and disconnect the Fuel Level Sensor electrical connector from the module cover. Then you need to disengage the locking tab on the module bucket. Finally, you need to slide the fuel level sensor downward off from the module bucket.
Q: How to install the Fuel Tank Pressure Sensor?
A:
You need to lightly lubricate the sensor seal with clean engine oil, and press the sensor fully into the fuel tank module. Then you need to install the Fuel Tank Pressure Sensor cover and connect the chassis wiring harness electrical connector to the pressure sensor. After that, you need to install the left pickup box wheelhouse liner and install the fuel tank if the vehicle is a crew cab.