< Back ×
My Vehicle Change Vehicle
2010 GMC Canyon
< Back to View All
Warning Lights, Interior Lights & Other Lights
- Department
- Prices
OEM (Genuine) 2010 GMC Canyon Lamp Asm-Rear License Plate
PartNumber: 20985455
Product Specifications- Location: Passenger Side
- Other Names: License Lamp
- Item Dimensions: 6.6 x 4.3 x 4.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15190512, 15886507
- Part Description: 2010 GMC Canyon Lamp Asm-Rear License Plate
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$42.75 MSRP:$61.45You Save: $18.70 (31%)OEM (Genuine) 2010 GMC Canyon Lamp Asm-Rear License Plate
PartNumber: 20985454
Product Specifications- Location: Driver Side
- Other Names: License Lamp
- Item Dimensions: 6.5 x 4.3 x 4.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15190511, 15886506
- Part Description: 2010 GMC Canyon Lamp Asm-Rear License Plate
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for License Plate Lights Repair
Q: How to install the Rear License Plate Lamp Bulb?
A:
You need to install the bulb to the lamp socket, and twist the lamp socket clockwise. Then you need to install the lamp assembly into the bumper and install the license lamp nut. After that, you need to install the electrical connector and inspect the lamp operation.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the license lamp nut?
A:
The recommended torque is 2.5 Nm (22 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the Rear License Plate Lamp Bulb?
A:
You need to ensure the headlamp switch is in the OFF position, and disconnect the electrical connector from the license lamp assembly. Then you need to remove the nut retaining the license lamp to the bumper and remove the license lamp assembly from the bumper. Finally, you need to twist the lamp socket counterclockwise to remove and remove the bulb.
By Bob
GM Specialist
01/11/2022