2010 GMC Canyon Turn Signal Bulbs

You need to ensure that the headlamp switch is in the OFF position and the ignition switch is in the LOCK position, and you need to open the hood. Then you need to release the locking tab, rotate the outward edge of the lamp assembly forward, and release the park/turn signal lamp socket. After that, you need to remove the park/turn signal lamp socket, and you need to remove the daytime running lamp socket and bulb.

You need to secure bulbs into the bulb sockets and to the lamp assembly and insert the inside edge of the lamp tabs into the grille support. Then you need to rotate the lamp assembly into the fender bracket and push on the outboard edge of the lamp until an audible click is heard. Finally, you need to inspect the lamps for proper operation.