< Back ×
2010 GMC Canyon Wheel Hub Bolt
My Vehicle Change Vehicle
2010 GMC Canyon
< Back to View All
Wheel Hubs, Bearings & Seals
- Department
- Prices
OEM (Genuine) 2010 GMC Canyon Hub Assembly Stud
PartNumber: 9595178$3.42 MSRP:$5.42You Save: $2.00 (37%)Product Specifications- Location: Driver Side; Passenger Side
- Item Dimensions: 5.0 x 4.0 x 3.5 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Hub Assembly Stud
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Bearing Support Bolt
PartNumber: 11609768$5.60 MSRP:$8.89You Save: $3.29 (38%)Product Specifications- Other Names: Bearing Support Bolt, Wheel Bolt
- Item Dimensions: 2.7 x 1.3 x 0.9 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 11570581
- Part Description: 2010 GMC Canyon Bearing Support Bolt
OEM (Genuine) 2010 GMC Canyon ABS Sensor Stud
PartNumber: 9591921$2.66 MSRP:$4.21You Save: $1.55 (37%)Product Specifications- Notes: W/O Z71-Off Road Pkg; 4WD; W/Z71-Off Road Pkg
- Location: Driver Side; Passenger Side
- Item Dimensions: 2.5 x 3.0 x 2.5 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon ABS Sensor Stud
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon M12x1.5x22.99 Steel Locking Lug Nuts with Key without External Threads
PartNumber: 17801027Product Specifications- Other Names: Wheel Lock Kit
- Item Dimensions: 6.1 x 2.4 x 2.9 inches
- Item Weight: 1.10 Pounds
- Material: Steel
- Replaces: 12499741
- Part Description: 2010 GMC Canyon M12x1.5x22.99 Steel Locking Lug Nuts with Key without External Threads
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Wheel Hub Bolt Repair
Q: How to install the Wheel Stud?
A:
You need to position the wheel stud in the axle flange and install the 4 washers and the lug nut to the stud. Then you need to tighten the lug nut and remove the lug nut and the washers. After that, you need to install the rear brake drum and lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to remove the Wheel Stud?
A:
You need to remove the rear brake drum and remove the wheel stud with the J 43631.
By Bob
GM Specialist
01/11/2022Q: Which special tool is required during the Wheel Stud replacement?
A:
You need to prepare a J 43631 Ball Joint Remover.
By Bob
GM Specialist
01/11/2022