< Back ×
My Vehicle Change Vehicle
2010 GMC Canyon
< Back to View All
Wipers & Washers
- Department
- Prices
OEM (Genuine) 2010 GMC Canyon Wiper Arm
PartNumber: 88958227
Product Specifications- Location: Passenger Side
- Other Names: Wiper Arm
- Item Dimensions: 21.4 x 7.4 x 5.3 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Wiper Arm
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Arm Asm, Windshield Wiper (Drivers Side)
PartNumber: 88958225
Product Specifications- Location: Driver Side
- Other Names: Wiper Arm
- Item Dimensions: 23.3 x 7.4 x 5.3 inches
- Item Weight: 2.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Arm Asm, Windshield Wiper (Drivers Side)
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Windshield Wiper Arms Repair
Q: What is the recommended torque for the wiper arm nut?
A:
The recommended torque is 33-38 Nm (24-28 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to remove the Windshield Wiper Arm?
A:
You need to remove and discard the wiper arm nut cap(s) and remove the wiper arm nut. Then you need to remove the wiper arm from the wiper arm pivot shaft if the wiper arm fails to release from the pivot shaft with a rocking motion. After that, you need to release the wiper arm blade. Finally, you need to clean the pivot shaft knurls.
By Bob
GM Specialist
01/11/2022Q: Which tool is required during the Windshield Wiper Arm replacement?
A:
You need to prepare a J 39637 Wiper Arm Puller.
By Bob
GM Specialist
01/11/2022