< Back ×
2010 GMC Sierra 3500 HD Canister Purge Valves
My Vehicle Change Vehicle
2010 GMC Sierra 3500 HD
< Back to View All
Emission Control
- Department
- Brands
- Prices
OEM (Genuine) 2010 GMC Sierra 3500 HD Solenoid
PartNumber: 12597567$35.12 MSRP:$66.28You Save: $31.16 (48%)Product Specifications- Notes: 4.8, 5.3, 6.0 & 6.2l
- Item Dimensions: 5.2 x 2.1 x 1.6 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12606684, 12570469, 12597566, 12597341
- Replaced by: 12735397
- Part Description: 2010 GMC Sierra 3500 HD Solenoid
Vehicle Fitment- 2010 GMC Sierra 3500 HD | Base, Denali, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
Dorman® OE Solutions Vapor Canister Purge Valve for 2010 GMC Sierra 3500 HD
PartNumber: 911-032$27.96Product Specifications- Connector Terminal Configuration: 2 Pin
- Housing Material: Plastic
- OE Part Number: 12597567, 8125973410
- UPC: 019495360926
- Part Description: 2010 GMC Sierra 3500 HD OE Solutions Vapor Canister Purge Valve
Vehicle Fitment- 2010 GMC Sierra 3500 HD | All Trims | 8 Cyl 6.0L
OEM (Genuine) 2010 GMC Sierra 3500 HD Purge Control Valve
PartNumber: 25932571$27.74 MSRP:$50.22You Save: $22.48 (45%)Product Specifications- Notes: Silverado, Sierra; 3500
- Item Dimensions: 6.3 x 4.3 x 4.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22728634, 10382105, 15750484
- Part Description: 2010 GMC Sierra 3500 HD Purge Control Valve
Vehicle Fitment- 2010 GMC Sierra 3500 HD | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
FAQ for Canister Purge Valves Repair
Q: How to install the Evaporative Emission Canister Vent Solenoid Valve?
A:
You should use a hose clamp, ensure the filter points down, secure the vent hose with a tie strap, use 5/8 in heater hose, secure it along the frame with tie straps, install the evaporative canister vent solenoid and then use 5/8 in heater hose to secure both ends with hose clamps.
By Bob
GM Specialist
02/11/2022Q: How to remove the Evaporative Emission Canister Vent Solenoid Valve?
A:
You should pull back on the retaining tab, release the vent solenoid valve, disconnect the vent solenoid hose from the plastic retainers, remove the vent solenoid hose and then replace the vent hose with a bulk 5/8 in heater hose.
By Bob
GM Specialist
02/11/2022